Advertisement
Available languages
Available languages
GARANT Roughness measuring device ST2
de
1.
General information
Read and observe the operating instructions, keep them as a reference for later and ensure they are accessible at
bg
all times.
2.
Safety
da
2.1.
GROUPED SAFETY MESSAGES
WARNING
en
Electric current
Risk of injury due to live components.
»
Only use indoors at low humidity.
fi
»
Before starting any installation, cleaning or maintenance work, remove the batteries from the device.
CAUTION
fr
Leaking electrolyte
Eyes and skin irritation can occur due to leaking, poisonous and corrosive electrolytes.
»
Avoid contact with your eyes and body.
it
»
In the event of contact, rinse out the affected area immediately with plenty of water and consult a doctor.
2.2.
INTENDED USE
hr
For both industrial and private use.
Use only in accordance with the technical data.
Use only when it is technically in good condition and safe to operate.
lt
Protected against solid foreign objects with a diameter ≥ 1.0 mm in accordance with IP 40.
2.3.
REASONABLY FORESEEABLE MISUSE
nl
Avoid vibrations, jerky movements, shocks and impacts.
Do not use in potentially explosive atmospheres.
Do not expose to strong heat, direct sunlight or open fire.
no
Only open the casing at the battery cover for replacing the battery.
Do not carry out any unauthorised modifications.
2.4.
PERSONAL PROTECTIVE EQUIPMENT
pl
Adhere to the national and regional regulations on safety and accident prevention. Select and provide protective work
wear, such as foot protection and protective gloves, that is appropriate for the respective activity and the expected risks.
pt
3.
Device overview
3.1.
ROUGHNESS MEASURING DEVICE ST2
ro
A
1
sv
2
3
4
sk
5
6
sl
7
8
es
9
10
cs
11
12
hu
62
Green light strip
Start button
Blue/red light strip
Display with touch screen
Duplex interface
USB-A interface
Micro-USB interface
microSD card slot
Probe
Vee block holder
Internal thread for accessories
Calibration standard stating the Rz nominal
value
13
Drive unit, removable
14
Height adjustment
15
Extension cable for drive unit
16
Positioner
17
Groove
18
Plug
19
Stop pin
20
Latch pin
21
Opening
22
Probe guard
23
Transport lock
24
Hand-held support
Advertisement
Chapters
