Siemens SIMATIC NET RUGGEDCOM RST916P Equipment Manual page 21

Installing the Device
2.3.2 Mounting the Device to a Panel
2
Figure 2.3
To mount the device to a panel, do the following:
1.
2.
3.
12
Side-Mount Orientation
Panel Mount Options
Secure the mounting adapters to the top and bottom of the device in the desired
orientation using the eight M4 screws included with the device.
1
1
Screw (M4)
1
Panel Mount Adapter
2
Figure 2.4 Panel Mount Adapter Assembly
Prepare mounting holes in the panel where the device is to be installed.
Place the device against the panel and align the adapters with the mounting
holes.
2
2
Equipment Manual, 11/2023, C79000-G8976-1489-06
RUGGEDCOM RST916P