Technical Specifications; General Specifications; Power Supply Specifications; Poe Output Specifications - Siemens SIMATIC NET RUGGEDCOM RST916P Equipment Manual

Technical Specifications

This section provides important technical specifications related to the device.
5.1

General specifications

Insulation
Overvoltage category
5.2

Power Supply Specifications

Note
When determining cable lengths, make sure the nominal input voltage for the power
supply is provided at the power source.
Supply Type
54 VDC
a
(T) denotes time-delay fuse
5.3

PoE Output Specifications

The RUGGEDCOM RST916P adheres to the following power output and IEEE 802.3
specifications depending on the input voltage supplied to the device.
RUGGEDCOM RST916P
Equipment Manual, 11/2023, C79000-G8976-1489-06
Power Minimum
Input
52 VDC
Power In
52 to 57 VDC
52 to 57 VDC
52 to 57 VDC
Class I
OVC II
Maximum Fuse Rating
Input
a
57 VDC 12 A (T)
Power Out Per Port (Maximum)
51 to 57 VDC
51 to 57 VDC
51 to 57 VDC
Isolation Maximum
Power
Consumption
1.5 kVDC 15 W
Specification
15 W IEEE 802.af/at
30 W IEEE 802.at
60 W IEEE 802.bt
5
Maximum
Combined
Power
Output at
PoE Ports
420 W
29