Table of Contents
Advertisement
Opening the Control Panel
The Control Panel lets you check the basic settings of the printer and set
alerts. Perform the following step to open the Control Panel.
From the Display menu, choose Printer Setting....
When your printer is connected to a network by means of the Ethernet
interface, choosing 'Printer Setting' automatically opens the Page-
Scope web connection. For details, refer to the Reference Guide on
the PagePro 1350EN Utlities & Documentation CD-ROM.
Paper tab
The Paper tab allows you to
Specify how the printer should respond to a media size error (the
requested media size is not available)
Specify whether Tray 1 is to be used as a multipurpose tray or as a tray
set to a single media size
Printer Setting Tab (USB and Parallel)
The Printer Setting tab allows you to
Specify whether a print job is to continue after a certain amount of time
has elapsed despite a media size error
Turn on/off the detection of a media size error
Define Personality. Default is Auto.
Define the internal Printer language.
Define Courier type. Default is Regular.
Determine the time elapsed before the printer will go into Energy Save
mode.
Turn on/off the Midnight Mode and specify the length of time until the
printer automatically enters the Midnight Mode
Define the length of time the printer waits for the end of a print job before
timing out
Define the language used for the internal printer test pages
Working with the Status Display
25
Advertisement
Table of Contents
