PROCESSTEC ViscoTwin 130 G8 Operation & Maintenance Manual page 8

LEAKAGES
Indicates that leaks are possible. Leaked fluid can cause slip-and-fall hazards and should
be cleaned up and disposed of immediately.
HOT SURFACE
Indicates a surface is hot to the touch and can cause burn injury. Do not maintain or
touch a hot surface until the pump is turned off and allowed to cool. If immediate repair
is necessary, it is advised to wear protective gloves while handling a hot part.
CAUTION
When operating the
equipment.
Commissioning and operating the
Qualified personnel in terms of the safety instructions in this operating and safety manual are persons
who have completely read this manual.
Furthermore, maintenance can only be performed by qualified maintenance technicians. Qualified
maintenance technicians in terms of the maintenance instructions in this operating and safety manual are
persons who have read Chapter 4 "Maintenance" and have been trained by
maintenance of this pump. In lieu of in-person training by
technician may also review the online maintenance movies available at http://processtec.com. WARNING:
ANY MAINTENANCE LEVEL 2 PERFORMED ON THIS PUMP BY UNTRAINED PERSONNEL WITHOUT THE
EXPRESS WRITTEN CONSENT OF PROCESSTEC WILL RELEASE PROCESSTEC OF ANY LIABILITY AND VOID
ANY WARRANTY CLAIMS ON THE PUMP..
In addition to this operating manual, general on-site regulations as well as city, state, and federal regulations
applicable to accident prevention must be made available and followed.
ViscoTwin 130 G8
The
33, and only in connection with the spare parts recommended by
Page 2
ViscoTwin 130
ViscoTwin 130 G8
may only be used in the applications as specified in Chapter 3 "Operation" on page
1. ABOUT VISCOTWIN SCREW PUMPS
G8, it is essential to wear appropriate protective
may only be performed by qualified personnel.
personnel, a qualified maintenance
Processtec
Processtec, Inc
in the use and
Processtec
.
PROCESSTEC INC. 2022