Geek's Corner; Oil Cooler With Oil Filter - PROCESSTEC ViscoTwin 130 G8 Operation & Maintenance Manual

6. GEEK'S CORNER

6. GEEK'S CORNER

6.1 Oil Cooler with Oil Filter

In case very hot product is pumped, the heat can sometimes penetrate through the shaft to the needle
bearings, and shaft seals (Pos. 2322). It is strongly recommended to install an oil cooler to maintain the oil
temperature at the needle bearings at max 212° F (100° C).
ViscoTwin
customized oil cooling system for pumps is shown below.
Processtec's
PROCESSTEC INC. 2022 Page 105