Table of Contents
Advertisement
LIFTING HOOK INSTALLATION
The Lifting Hook can be attached to the Pump
Housing, and is designed to lift the
Pump Head while maintaining a center of balance.
Be sure that the clamps are firmly in place on the
Pump Housing before proceeding.
STRAP PLACEMENT FOR
HOISTING THE MOTOR
Forklift forks can also be used to lift the
Motor, in conjunction with properly placed
hoisting straps.
Make sure that the
supported and that both forks are making good
contact before lifting.
PUMP ASSEMBLY HOISTED IN MID-AIR
ViscoTwin
When the
via the lifting strap, the position of the strap on
the lantern will determine whether the assembly
stays level or not.
You can lift the entire assembly a few inches to
see if the position of the lifting strap is centered
on the assembly, supporting it evenly, then lower
it back down to re-adjust the position of the lifting
strap on the Safety Lantern.
A proper position on the Safety Lantern will allow you to hoist the assembly in a level position.
PROCESSTEC INC. 2022
ViscoTwin
ViscoTwin
ViscoTwin
Motor is completely
Assembly is hoisted in midair
2. INSTALLATION
Page 25
Advertisement
Table of Contents
