Table of Contents
Advertisement
1. ABOUT VISCOTWIN SCREW PUMPS
1.1 Safety Notes
This manual contains instructions which should be heeded to ensure personal safety and prevent damage
to property. These instructions are highlighted by a warning triangle and a color to indicate the degree of
the hazard. The following warnings should be observed throughout the life cycle of the pump:
ROTATING PARTS
Indicates rotating parts that can cause injury. Only perform work on or near these parts
when it is locked to prevent rotation. It is advised to have a protective barrier surrounding
the rotating part to prevent injury or property damage during operation.
HIGH VOLTAGE
Indicates high voltage and risk of shock or severe burns. No work should be performed
around high voltage parts unless they have been disconnected from the main power
supply. Any work on high voltage parts must only be performed by an electrician licensed
in the state where operations and maintenance is being performed.
CRUSHING PARTS
Indicates moving parts that can crush and cut. Perform work with awareness of how
parts move and where these crushing parts can be encountered.
SUSPENDED LOAD
Indicates a suspended or overhung load, where parts can fall, slip, or tip over if not
properly secured. Do no work on any part that is suspended and avoid being directly
under or near a suspended load. Do not stand between a stationary object and a
suspended load.
LIFTING OBJECTS
Indicates heavy objects that can cause muscle strain or back injury. Lifting aids and
proper lifting techniques should be used to prevent injury.
PROCESSTEC INC. 2022
1. ABOUT VISCOTWIN SCREW PUMPS
Page 1
Advertisement
Table of Contents
