Pump Housing Configuration - PROCESSTEC ViscoTwin 130 G8 Operation & Maintenance Manual

5.5 Pump Housing Configuration

ViscoTwin 130 G8
Each
for a variety of configuration options to suit particular
application.
Each Configuration has been uniquely identified with a
series of letters and numbers that call out the specific
flow direction, shaft rotation, pin positions and spindle
arrangements to get the desired output.
For example, a FHO3V configuration means that the
Flow Direction is Face In/Housing Out (FH), Shaft Rota-
tion is Outward (O), Pin Position is Configuration 3 (3)
with Spindle Arrangement V (V).
There are SIX possible configurations, and each one is
listed in the chart below, as well on the following pages.
The default configuration is FHO3V.
CONFIGURATION
NAME
FHO3V
FHI1A
HFI1V
HFO3A
BDB2V
BDB2A
Page 94
Pump Housing can be set up
FLOW
DIRECTION
Face In / Housing
Out
Face In / Housing
Out
Housing In / Face
Out
Housing In / Face
Out
Bi-Directional Bi-Directional
Bi-Directional Bi-Directional
The TOP of the pump is always determined by the
location of the VENT Plug (Pos. 2232) on the Bearing
Housing, regardless of the Pump Housing orientation
and the final position of the Pump.
SPINDLE PIN
ROTATION POSITION
Outwards 3
Inwards 1
Inwards 1
Outwards 3
2
2
5. TOOL-BOX
SPINDLE
ARRANGE- COMMENTS
MENT
Product dragged
V
along the bottom
Product dragged
A
along the top
Product dragged
V
along the top
Product dragged
A
along the bottom
Limited Viscosity
V
Tapered Spindles Preferred
Limited Viscosity
A
Tapered Spindles Preferred
PROCESSTEC INC. 2022