3.9 Visual Inspection
We recommend daily observation of the pump as described in Subsection 4.2.1 "Maintenance Level 1
(ML-1)" on page 43.
3.10 Available Elastomer Options
If excessive wear and tear on elastomers in the Pump Housing is observed,
elastomer options to address demanding applications based on temperature, oil/fat content, and
permeable stress. We offer EPDM, FKM, V70SW and Perlast elastomers to address various oil content/
temperature/stress combinations.
For more information, check out the Elastomer Options Chart in Subection 1.4.4 "Elastomer Options" on
page 10.
PROCESSTEC INC. 2022
3. OPERATION
offers various
Processtec
Page 37