Chipset - ADLINK Technology AmITX-CF-G User Manual

8.5.

Chipset

8.5.1. Chipset > System Agent (SA) Configuration
Feature
System Agent (SA) Configuration ►
System Agent (SA) Configuration
SA PCIe Code Version
VT-d
Memory Configuration ►
Memory Configuration
Max TOLUD
MRC Fast Boot
Memory Remap
Memory Thermal Management
SPD Write Protect
Graphics Configuration ►
Graphics Configuration
Primary Display
Internal Graphics
GTT Size
DVMT Total Gfx Mem
PEG Port Configuration ►
56
Options
Submenu
Info only
Info only
Info only
Submenu
Info only
Maximum Value of TOLUD. Dynamic assignment
Dynamic
would adjust TOLUD automatically based on largest
1 GB
MMIO length of installed graphics controller.
1.25 GB
1.5 GB
1.75 GB
2 GB
2.25 GB
2.5 GB
2.75 GB
3 GB
3.25 GB
3.5 GB
Enable/Disable fast path through the MRC
Disabled
Enabled
Enable/Disable Memory Remap above 4GB
Disabled
Enabled
Enable/Disable Memory Thermal Management
Disabled
Enabled
Enable/Disable setting SPD Write Protect. For security
Disabled
recommendations, SPD write disable bit must be set.
Enabled
Submenu
Info only
Auto
IGFX
PEG
Auto
Disabled
Enabled
2MB
4MB
8MB
128M
256M
MAX
Submenu
Description
System Agent (SA) Configuration
Memory Configuration parameters
Graphics Configuration
Select which of IGFX/PEG/PCI Graphics device
should be Primary Display or select SG for Switchable
Gfx.
Keep IGFX enabled based on the setup options.
Select the GTT Size
Select DVMT5.0 Total Graphic Memory size used by
the Internal Graphics Device.
PEG Port Options
Safety Instructions