Advertisement
Quick Links
AmITX-BW-I
User's Manual
Thin Mini-ITX Embedded Motherboard with
Intel
Pentium
®
Intel
®
Manual Revision:
Revision Date:
Part Number:
This datasheet has been downloaded from
/Celeron
Processor N3000 family,
®
®
Atom™ Processor x5-E8000
1.00
April 11, 2016
50-1J069-1000
http://www.digchip.com
at this
page
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ADLINK Technology AmITX-BW-I
Summary of Contents for ADLINK Technology AmITX-BW-I
- Page 1 AmITX-BW-I User’s Manual Thin Mini-ITX Embedded Motherboard with Intel Pentium /Celeron Processor N3000 family, ® ® ® Intel Atom™ Processor x5-E8000 ® Manual Revision: 1.00 Revision Date: April 11, 2016 Part Number: 50-1J069-1000 This datasheet has been downloaded from http://www.digchip.com...
-
Page 2: Revision History
Revision History Revision Description Date 1.00 Initial release 2016-04-11 Page 2 AmITX-BW-I... -
Page 3: Preface
When products are at their end of life, our customers are encouraged to dispose of them in accordance with the product disposal and/or recovery programs prescribed by their nation or company. AmITX-BW-I is a RoHS compliant and leadfree product Trademarks Product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. -
Page 4: Table Of Contents
Ethernet Connectors (LAN1, LAN2) ....................17 4.1.5. USB 3.0 Connectors (USB1-4) ......................17 4.1.6. Audio Connectors (Line-out, Mic-in) ....................18 4.2. Internal Connectors ......................18 4.2.1. ATX Power Connector (4-pin) ......................18 4.2.2. SATA Connectors (SATA1, SATA2) .....................19 4.2.3. SATA Power Connector (ST_PWR).....................19 Page 4 AmITX-BW-I... - Page 5 6.2. I/O Map..........................37 6.2.1. I/O Map .............................37 6.2.2. IRQ Lines PIC mode..........................38 6.2.3. IRQ Lines APIC mode .........................39 6.3. PCI Configuration Space Map ..................... 40 6.4. PCI Interrupt Routing Map....................41 6.5. SMBus Slave Address......................41 AmITX-BW-I Page 5...
- Page 6 7.3.12. Thermal ............................55 7.3.13. Security............................55 7.3.14. Miscellaneous..........................55 7.4. Security ..........................56 7.4.1. Password Description ........................56 7.5. Boot ............................ 56 7.5.1. Boot Configuration ..........................56 7.6. Save & Exit .......................... 57 Safety Instructions ...................... 58 Getting Service ......................59 Page 6 AmITX-BW-I...
-
Page 7: Introduction
The AmITX-BW-I supports dual stacked SODIMM sockets for up to 8 GB non-ECC type DDR3L memory, and graphics outputs include DisplayPort, HDMI, and optional eDP and optional dual-channel 18/24-bit LVDS. I/O features include HD Audio, dual Gigabit Ethernet port, 4x USB 3.0 ports and 4x USB 2.0 ports, 6x COM ports, PCIe x1 slot, Mini PCIe slot, mSATA slot, and 2x SATA 6 Gb/s ports. -
Page 8: Specifications
(optional): switched from DisplayPort ((build option, not available concurrently with LVDS) SIM Card slot (build option) microSD Card slot (build option) Front Panel Header Audio Header Feature Connector Header PS/2 KB/MS Connector TPM Header SPI Header ATX Power Connector (4-pin) Page 8 AmITX-BW-I... -
Page 9: Form Factor
AT and ATX mode (AT mode start controlled by BMC) Standard Voltage Input: 12VDC ±5% Power Management: ACPI 4.0 compliant Power States: Supports C0, C1, C1E, C6C, C6, C7, S0, S1, S3, S4, S5 (Wake-on-USB S3/S4, WoL S3/S4/S5) AmITX-BW-I Page 9... -
Page 10: Temperatures
MIL-STD-202F, Method 213B, Table 213-I, Condition A and Method 214A, Table 214-I, Condition D HALT: Thermal Stress, Vibration Stress, Thermal Shock and Combined Test 2.13. Operating Systems Standard Support: Windows 7/8.1/10 32/64-bit, Linux 32/64-bit Extended Support (BSP): WES7, Linux Page 10 AmITX-BW-I... -
Page 11: Functional Diagram
COM1, 2 CPU Fan COM2 Super I/O SMbus TM4C123 ITE IT8783 Sys Fan 4x RS-232 COM3 Sensor MAX6642 COM4 GPIO Feature Connector COM5 NXP PCA9535 GPIO System signals COM6 PS/2 Rear I/O PS/2 MS/KB TPM Header Internal I/O AmITX-BW-I Page 11... -
Page 12: Mechanical Layout
Top Side Connectors CPU Fan 12V DC-in Feature Connector Front Panel ATX Power Connector Audio Connector SPI Header/Socket PCIe x1 USB Header LVDS 2x SATA2 6x RS-232 mSATA Slot PS/2 KB/MS 2 Stacked SODIMM System Fan Mini PCIe Page 12 AmITX-BW-I... -
Page 13: Microsd Slot
Bottom Side Connectors microSD slot SIM slot DB40 Connector AmITX-BW-I Page 13... -
Page 14: Mechanical Dimensions
3.2. Mechanical Dimensions Dimensions: mm Top View Side View Page 14 AmITX-BW-I... -
Page 15: Connectors And Jumpers
DC Power Inlet The AmITX-BW-I supports a screw-type external 12V DC-in power connector. Maximum current draw is 10A. Note: Either the DC Power Inlet or the internal ATX Power Connector (ATX_PWR) must be used to supply the motherboard with +12V ±5%. -
Page 16: Displayport
TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– Reserved DDC/CEC Ground +5 V Power Hot Plug Detect Page 16 AmITX-BW-I... -
Page 17: Ethernet Connectors (Lan1, Lan2)
Status Description Status Description 10 Mb connection No Link Green 100 Mb connection Orange Linked Orange 1 Gb connection Blinking Data Activity 4.1.5. USB 3.0 Connectors (USB1-4) Pin # Signal USB3.0_P5VA USB2_CMAN USB2_CMAP USB3A_CMRXN USB3A_CMRXP USB3A_CMTXN USB3A_CMTXP AmITX-BW-I Page 17... -
Page 18: Audio Connectors (Line-Out, Mic-In)
Internal Connectors 4.2.1. ATX Power Connector (4-pin) AmITX-BW-I supports a proprietary internal ATX Power Connector (4-pin). Note: Either the DC Power Inlet or the internal ATX Power Connector (4-pin) must be used to supply the motherboard with +12V ±5%. Pin #... -
Page 19: Sata Connectors (Sata1, Sata2)
4.2.2. SATA Connectors (SATA1, SATA2) Two SATA ports are available on the AmITX-BW-I and support SATA Gen3 (6.0/3.0/1.5Gb/s). Note: If mSATA is installed, SATA2 is disabled. See 4.3.4 SATA2/mSATA Select (JP1). Pin # Signal 4.2.3. SATA Power Connector (ST_PWR) Pin # Signal 3.3V... -
Page 20: Usb Header
5V/SB5V: 5V supplies for external devices. SB5V is supplied during power down to allow wakeup on USB device activity during S3~S4 state. P5V_USB2 P5V_USB2 CN35 85USB2_P2_DN_R 85USB2_P3_DN_R 85USB2_P2_DP_R 85USB2_P3_DP_R BH_10_S2mm_N9 Pin # Signal Pin # Signal P5V_USB P5V_USB P2_DN_R- P3_DN_R P2_DP_R P3_DP_R USB Cable (optional): USB 2.0 Header to 2x Female Type-A Cable (length 200mm), P/N: 30-20874-1000 Page 20 AmITX-BW-I... -
Page 21: Ps/2 Keyboard And Mouse Connector
Note: Signals shared with Audio Connector on Rear I/O. Signal Pin # Pin # Signal LFE-OUT CEN-OUT AAGND AAGND FRONT-OUT-L FRONT-OUT-R AAGND AAGND REAR-OUT-L REAR-OUT-R SIDE-OUT-L SIDE-OUT-R AAGND AAGND MIC1-L MIC1-R AAGND AAGND LINE1-L LINE1-R MUTE AAGND SPDIF-OUT AmITX-BW-I Page 21... -
Page 22: Cpu Fan And System Fan Connectors
BOM option (default 5V). COM5 Supports RS-232 only, 5V/12V power support by BOM option (default 5V). COM6 Supports RS-232 only, 5V/12V power support by BOM option (default 5V). RS-232 Pin # Signal Pin # Signal 5V / 12V Page 22 AmITX-BW-I... - Page 23 — — — — 5V / 12V SW10/SW11 (RS-422/485 Mode Select) RS-232 (default) RS-422 RS-485 OFF* See Section 4.3.8 Serial Port Mode Switch Setting (SW14, SW10, SW11) COM Cable (optional): COM Port Cable (length 250mm), P/N: 30-20876-0000 AmITX-BW-I Page 23...
-
Page 24: Lvds Connector
PU 2K2Ω, 3.3V LVDS LVDS A3+ VDD ENABLE 3.3V level LVDS LVDS B0- DDC CLK PU 2K2Ω, 3.3V LVDS LVDS B0+ LCDVCC Max 0.5A Max. 0.5A POWER GND LCDVCC Max 0.5A LVDS LVDS B1- LCDVCC Max 0.5A Page 24 AmITX-BW-I... -
Page 25: Lvds Auxiliary Connector
Backlight Power switchable by jumper either 5V (default) or 12V. Maximum 1A per pin for both voltages BKLT_CTL Backlight control, PWM signal to implement voltage in the range 0-3.3V See Section 4.3 Jumper and Switch Settings for Backlight Power Selection (JP2), Panel Power Selection (JP3), and Panel Power Selection (JP3) settings. AmITX-BW-I Page 25... -
Page 26: Front Panel Connector
4.2.11. Front Panel Connector 2x12-pin 2.0 pitch standard wafer connector The front panel connector of AmITX-BW-I provides two USB2.0 header, Audio MIC-In / Line-Out, ATX power switch, Reset, HDD LED, and SUS LED (System Power LED). Pin # Signal Ioh/ Iol... -
Page 27: Feature Connector
4.2.12. Feature Connector 2x13-pin 2.0 pitch standard wafer connector The feature connector of AmITX-BW-I provides Case Open, I2C, SMBus, and GPIO (10pin). Signal Description TEMPS Analogue temp sensor, connect to analog input of BMC EXT_BAT Connect to RTC power CASE_OPEN# Any time case open occurred, system will notice/show case open alert in POST when the next booting. -
Page 28: Spi Header
SPI_IO3_#HOLD SPI Data I/O: A bidirectional signal used to support the new Dual IO Fast Read, Quad IO Fast Read and Quad Output Fast Read modes. This signal is not used in Dual Output Fast Read mode. Page 28 AmITX-BW-I... -
Page 29: Db40 Debug Board Connector
3.3V provide from BIOS_MODE Connect to Jumper for Program COM module Debug interface 3.3V_BMC always power 3.3V provide from BMC_STATUS COM module Reserved Note: the pin description on the Debug Module is the inverse of that on the motherboard. AmITX-BW-I Page 29... -
Page 30: Jumper And Switch Settings
ATX (default) 4.3.2. Clear CMOS and BIOS Default (JP5) JPY1 ATX/AT Mode Normal (default) Clear CMOS 4.3.3. Reset BIOS Defaults (JP6) JPY1 ATX/AT Mode Normal (default) Reset BIOS Defaults 4.3.4. SATA2/mSATA Select (JP1) SATA2/mSATA Select SATA2 (default) mSATA Page 30 AmITX-BW-I... -
Page 31: Lvds Backlight Power Jumper Selection (Jp2)
LVDS Backlight Power Jumper Selection (JP2) Backlight Power 5V (default) 4.3.6. LVDS Panel Power Jumper Selection (JP3) Panel Power 2-3* 3.3V (default) 4.3.7. LVDS Backlight Enable Jumper Selection (JP4) Backlight Power Active High /Convert 2-3* Active LowNormal (default) AmITX-BW-I Page 31... -
Page 32: Serial Port Mode Switch Setting (Sw14, Sw10, Sw11)
SW14 (SER1 MODE SEL) RS-232 (default)* RS-422 RS-485 OFF* SW10 (SER3 MODE SEL) RS-232 (default) RS-422 RS-485 OFF* SW11 (SER4 MODE SEL) RS-232 (default) RS-422 RS-485 OFF* 4.3.9. BIOS Switch Setting (SW1) ON (default) Boot from SPI0* Boot from SPI1 Page 32 AmITX-BW-I... -
Page 33: Onboard Connector Information
(optional) LVDS CN21 JVE FI-X30SSLA-HF WELL-LIN WL1058-HL-30P (PH1.0) ENTERPRISE LVDS Auxiliary CN45 Molex 53261-1071 WELL-LIN WL1025-H-10P (PH1.25) ENTERPRISE Feature CN14 JVE 23N6850-28S10B-01G-C-01 JWT A2005H00-2C*14 (PH2.0) Audio 23N6850-26S10B-01G-C-01 JWT A2005H00-2CX13P (PH2.0) Front Panel CN26 JVE 23N6850-24S10B-01G-C-01 YY-1970H-2*12P (PH2.0) AmITX-BW-I Page 33... -
Page 34: Smart Embedded Management Agent (Sema)
(MSB<<8 + LSB) x 3.3 / 1024 +V1.0V (MSB<<8 + LSB) x 3.3 / 1024 +V3.3V (MSB<<8 + LSB) x 1.1 x 3.3 / 1024 +VIN (MSB<<8 + LSB) x 6.000 x 3.3 / 1024 (MAIN CURRENT) Use Main Current Function Page 34 AmITX-BW-I... -
Page 35: Main Current
The Exception Code is not stored in the Flash Storage and is cleared when the power is removed. Therefore, a “Clear Exception Code” command is not needed or supported. Exception Code Error Message NOERROR NO_SUSCLK NO_SLP_S5 NO_SLP_S4 NO_SLP_S3 BIOS_FAIL RESET_FAIL POWER_FAIL LOW_VIN VCORE VGFX V1P05S AmITX-BW-I Page 35... -
Page 36: Bmc Flags
The BMC Flags register returns the last detected Exception Code since power-up and shows the BIOS in use and the power mode. Description [ 0 ~ 4 ] Exception Code [ 6 ] 0 = AT mode 1 = ATX mode [ 7 ] 0 = Standard BIOS 1 = Fail-safe BIOS. Page 36 AmITX-BW-I... -
Page 37: System Resources
Serial Port 1 378-37F Available 380-3AF Available Master PIC Edge/Level Trigger register Slave PIC Edge/Level Trigger register 0A00~0A2F Reserved for SIO functions base address (ex: PME /GPIO etc) CF8-CFB PCI configuration address register (32 bit I/O only) AmITX-BW-I Page 37... -
Page 38: Irq Lines Pic Mode
IRQ11 via SERIRQ / PIRQ Note (1) PS/2 Mouse IRQ12 via SERIRQ / PIRQ Note (1) Math Processor Note (1) Generic Note (1) Note (1): These IRQs can be used for PCI devices when onboard device is disabled. Page 38 AmITX-BW-I... -
Page 39: Irq Lines Apic Mode
Note (1) 33~38 I2C ES Controller Note (1) 45,47 SD Host Controller Note (1) 48~50,91 Intel Serial IO GPIO Controller Note (1) Note ( 1): These IRQs can be used for PCI devices when onboard device is disabled. AmITX-BW-I Page 39... -
Page 40: Pci Configuration Space Map
Internal Intel PCI-to-PCI Bridge(PCIE) Internal Intel ISA Bridge Internal Intel Memory controller Internal Intel SMBUS Controller Internal Intel Ethernet Controller Internal Intel Ethernet Controller Note (1): The Bus number would be changed if PEG/PCIE port has device. Page 40 AmITX-BW-I... -
Page 41: Pci Interrupt Routing Map
INTC:18 INTD:19 INTA:16 INTB:17 Int3 INTD:19 INTA:16 INTB:17 INTC:18 SATA SMBus Line Controller Controller Controller Int0 INTA:16 INTA:19 INTB:18 Int1 INTB:17 Int2 INTC:18 Int3 INTD:19 6.5. SMBus Slave Address Device Address DIMM A DIMM B Extend GPIO AmITX-BW-I Page 41... -
Page 42: Bios Setup
- Serial Port ► Console - Thermal ► - Miscellaneous ► - Intel(R) I211 Gigabit Network Connection ► - Intel(R) I211 Gigabit Network Connection ► - Driver Health ► Notes: ► indicates a submenu Gray text indicates info only Page 42 AmITX-BW-I... -
Page 43: Main
SOC Information Feature Options Description Braswell SoC Info only Stepping. TXE FW Version Info only TXE FW Version. Stepping Info only PCH Stepping. 7.2.4. System Language Feature Options Description System Language English Choose the system default language AmITX-BW-I Page 43... -
Page 44: System Management
Display actual VCC-CORE voltage VNN_A Read only Display actual VNN_A voltage VGG_S3 Read only Display actual VGG_S3 voltage VDDQ Read only Display actual VDDQ voltage VRTC Read only Display actual VRTC voltage V3P3_S Read only Display actual V3P3_S voltage Page 44 AmITX-BW-I... - Page 45 ATX-Mode. Remain Off :To start the machine the power button has to be Last State pressed. Last State: when powered on during a power failure the system will automatically power on when power is restored AmITX-BW-I Page 45...
-
Page 46: System Date And Time
Requires the alpha-numeric entry of the day of the week, day of the month, calendar month, and all 4 digits of the year, indicating the century and year (Fri XX/XX/20XX) System Time HH/MM/SS Presented as a 24-hour clock setting in hours, minutes, and seconds Page 46 AmITX-BW-I... -
Page 47: Advanced
Primary Display Auto Select which of Auto/IGFX/PEG/PCIE Graphics device should be Primary Display. IGFX PCIE Integrated Graphics Device Enabled Enable: Enable Integrated Graphics Device (IGD) when selected as the Primary Video Adaptor. Disable: Always disable IGD Disabled AmITX-BW-I Page 47... - Page 48 LCD Panel Type Select LCD panel used by Internal Graphics Device by selecting the appropriate setup item. 640x480 800x600 1024x768 1280x1024 1400x1050(RB) 1400x1050 1600x1200 1366x768 1680x1050 1920x1200 1440x900 1600x900 1024x768 1280x800 1920x1080 2048x1536 NXP PTN3460 Configuration Info only Page 48 AmITX-BW-I...
-
Page 49: Memory
Determines how SATA Controller(s) operate. AHCI RAID SATA Test Mode Disabled Test mode Enabled / Disabled Enabled SATA Interface Speed Default Indicates the maximum speed the SATA controller can support. Gen1 Gen2 Gen3 SATA Port Configuration Submenu SATA Device Options Settings. AmITX-BW-I Page 49... -
Page 50: Usb
Device reset time-out 10 sec USB mass storage device start unit command time-out. 20 sec 30 sec 40 sec Device power-up delay Auto Maximum time the device will take before it properly reports itself to the host controller. Manual Page 50 AmITX-BW-I... -
Page 51: Network
PCI Express Unsupported Request Reporting Enable/Disable . Enabled Disabled PCI Express Device Fatal Error Reporting Enable/Disable . Enabled NFER Disabled PCI Express Device Non-Fatal Error Reporting Enable/Disable. Enabled Disabled PCI Express Device Correctable Error Reporting Enable/Disable . Enabled AmITX-BW-I Page 51... -
Page 52: Super Io
Description Serial Port 1 Configuration Info only Serial Port Disabled Enable or Disable Serial Port (COM) Enabled Device Setting Info only Change Setting Auto Select an optimal setting for Super IO Device. IO=3F8;IRQ=4; IO=3F8;IRQ=3,4,5,6,7,9,10,11,12 IO=2F8;IRQ=3,4,5,6,7,9,10,11,12 IO=3E8;IRQ=3,4,5,6,7,9,10,11,12 IO=2E8;IRQ=3,4,5,6,7,9,10,11,12 Page 52 AmITX-BW-I... -
Page 53: Acpi And Power Management
Console Redirection enable or disable. Enabled Console Redirection Settings Submenu The settings specify how the host computer and the remote computer (which the user is using) will exchange data. Both computers should have the same or compatible settings. COM4 Info only AmITX-BW-I Page 53... - Page 54 Putty KeyPad VT100 Select FunctionKey and KeyPad on Putty. LINUX XTERMR6 ESCN VT400 Redirection After BIOS Post Always Enabled The Settings specify if BootLoader is selected, then legacy console redirection is disabled before booting to legacy OS. BootLoader Page 54 AmITX-BW-I...
-
Page 55: Thermal
Enable SATA Clock Spread Spectrum feature. Enabled PCI Clock Spread Spectrum Disabled Enable PCI Clock Spread Spectrum feature. Enabled Security Info only BIOS Security Configuration BIOS Security Configuration Trusted Computing Trusted Computing Settings Chassis Intrusion Support Disabled Chassis Intrusion Support Enabled AmITX-BW-I Page 55... -
Page 56: Security
New Boot Option Policy Default Controls the placement of newly detected UEFI boot options Place First Place Last BOM Config Default BOM Config Legacy System Yocto Linux CSM Configuration Submenu CSM configuration: Enable/Disable, Option ROM execution settings, etc. Page 56 AmITX-BW-I... -
Page 57: Save & Exit
Restore/Load Default values for all the setup options. Save as User Defaults Yes No Save the changes done so far as User Defaults. Restore User Defaults Yes No Restore the User Defaults to all the setup options. Boot Override Info only AmITX-BW-I Page 57... -
Page 58: Safety Instructions
Liquid has penetrated the equipment; It has been exposed to high humidity/moisture; It is not functioning or does not function according to the user’s manual; It has been dropped and/or damaged; and/or, It has an obvious sign of breakage. Page 58 AmITX-BW-I... -
Page 59: Getting Service
5215 Hellyer Avenue, #110, San Jose, CA 95138, USA Tel: +1-408-360-0200 Toll Free: +1-800-966-5200 (USA only) Fax: +1-408-360-0222 Email: info@adlinktech.com ADLINK Technology (China) Co., Ltd. Address: 300 Fang Chun Rd., Zhangjiang Hi-Tech Park, Pudong New Area Shanghai, 201203 China Tel: +86-21-5132-8988 Fax: +86-21-5132-3588 Email: market@adlinktech.com... - Page 60 84 Genting Lane #07-02A, Cityneon Design Centre Singapore 349584 Tel: +65-6844-2261 Fax: +65-6844-2263 Email: singapore@adlinktech.com ADLINK Technology Singapore Pte. Ltd. (Indian Liaison Office) Address: #50-56, First Floor, Spearhead Towers Margosa Main Road (between 16th/17th Cross), Malleswaram Bangalore - 560 055, India Tel: +91-80-65605817, +91-80-42246107 Fax:...
Need help?
Do you have a question about the AmITX-BW-I and is the answer not in the manual?
Questions and answers