Table of Contents
Advertisement
174
5-2. Driving procedures
performing the proper procedures
for starting the vehicle, contact your
Toyota dealer immediately.
■
If the fuel cell system is mal-
functioning
P.453
■
Electronic key battery
P.425
Operation of the power switch
■
●
If the switch is not pressed shortly
and firmly, the power switch mode
may not change or the fuel cell
system may not start.
●
If attempting to restart the fuel cell
system immediately after turning
the power switch off, the fuel cell
system may not start in some
cases. After turning the power
switch off, please wait a few sec-
onds before restarting the fuel cell
system.
■
Customization
If the smart key system has been
deactivated in a customized setting,
refer to P.470.
WARNING
■
When starting the fuel cell
system
Always start the fuel cell system
while sitting in the driver's seat.
Do not depress the accelerator
pedal while starting the fuel cell
system under any circumstances.
Doing so may cause an accident
resulting in death or serious injury.
■
Caution while driving
If fuel cell system failure occurs
while the vehicle is moving, do not
lock or open the doors until the
vehicle reaches a safe and com-
plete stop. The steering lock func-
tion will activate and this may lead
to an accident, resulting in death
or serious injury.
MIRAI Owners Manual_USA_M62034_en
NOTICE
■
When starting the fuel cell
system
If the fuel cell system becomes
difficult to start, have your vehicle
checked by your Toyota dealer
immediately.
■
Symptoms indicating a mal-
function with the power
switch
If the power switch seems to be
operating somewhat differently
than usual, such as the switch
sticking slightly, there may be a
malfunction. Contact your Toyota
dealer immediately.
Stopping the fuel cell sys-
tem
1
Stop the vehicle completely.
2
Set the parking brake.
(P.184)
3
Shift the shift position to P.
(P.180)
Check that the shift position indica-
tor shows P and the parking brake
indicator is illuminated.
4
Press the power switch.
The fuel cell system will stop, and
the meter display will be extin-
guished (the shift position indicator
will be extinguished a few seconds
after the meter display).
5
Release the brake pedal and
check that "ACCESSORY" or
"IGNITION ON" is not shown
on the meter.
■
Stopping the fuel cell system in
cold temperatures
●
When the power switch is pressed
and the fuel cell system is stopped
Advertisement
Table of Contents
