Table of Contents
Advertisement
346
6-1. Using the air conditioning system and defogger
Rear control panel (if
■
equipped)
Adjust the rear seat heater
A
temperature level
The seat heater can be adjusted in
3 levels. (Low, Mid or Hi)
Adjust the rear right side seat
B
ventilator fan speed level
The seat ventilator can be adjusted
in 3 levels. (Low, Mid or Hi)
Indicators
C
■
The heated steering wheel, seat
heaters and seat ventilators can
be used when
The power switch is in ON.
■
Air conditioning system-linked
control mode
When the seat ventilator fan speed
level is Hi, the seat ventilator fan
speed becomes higher according to
the fan speed of the air conditioning
system.
■
When the air conditioning sys-
tem is operating in S-FLOW
mode
If a passenger is not detected in the
passenger seat, the seat ventilator
and seat heater of the passenger's
seat will be turned off if on.
(P.340)
MIRAI Owners Manual_USA_M62034_en
■
Change settings for the rear
control panel
The following settings can be
changed.
• Reaction time after touching the
button.
• Turn button operation sounds
ON/OFF
1
Stop the vehicle in a safe place
and stop the fuel cell system.
2
Press the power switch 1 time
with brake pedal released and
switch the mode to ACC.
The setting cannot be changed
when the power switch is ON.
3
Press
for 10 seconds or
more while pressing the
ton.
4
Release the button after the
buzzer sounds.
5
Select customizable item
Change the reaction time for button
operations:
When
is pressed it becomes
faster, when
is pressed it
becomes slower.
Change the button operation
sounds ON/OFF
When
is pressed it turns ON,
when
is pressed it turns OFF.
6
When changes are complete, the
indicators for the seat
heater/seat ventilator turns on as
shown in the following table.
but-
Advertisement
Table of Contents
