Table of Contents
Advertisement
●
When the vehicle is stopped after
the fuel cell system has been
stopped in an emergency while
driving
●
When voltage of the 12-volt bat-
tery drops while the shift position
is in a position other than P
*
: When the power switch is pressed
while driving at extremely slow
speeds, such as immediately
before stopping the vehicle, the
shift position may automatically
change to P. Make sure that the
vehicle is completely stopped
before pressing the power switch.
■
If the shift position cannot be
shifted from P
There is a possibility that the 12-volt
battery is discharged. Check the 12-
volt battery in this situation.
(P.473)
WARNING
■
P position switch
●
Do not press the P position
switch while the vehicle is mov-
ing.
If the P position switch is
pressed when driving at very
low speeds (for example,
directly before stopping the
vehicle), the vehicle may stop
suddenly when the shift position
switches to P, which could lead
to an accident.
●
In order to prevent the shift
position from accidentally being
changed, do not touch the P
position switch when not using
them.
MIRAI Owners Manual_USA_M62034_en
5-2. Driving procedures
NOTICE
■
Notes regarding shift lever
and P position switch opera-
tion
Avoid repeatedly operating the
shift lever and P position switch in
quick succession.
The system protection function
may activate and it will not be
temporarily possible to shift the
shift position other than P. If this
happens, please wait for a while
before attempting to change the
shift position again.
■
When exiting the vehicle
(driver's seat only)
Check that the shift position indi-
cator shows P and that the park-
ing brake indicator is illuminated
before opening the door and exit-
ing the vehicle.
When the power switch is
changed to ACC with the
shift position held in N
Performing the following oper-
ations allows the power
switch to be set to ACC with
the shift position held in N.
1
Operate the shift lever and
change the shift position to N
when the fuel cell system is
operating.
2
Return the shift lever to its
regular position (
3
Operate the shift lever to N
and hold it there until the
buzzer sounds.
181
5
).
Advertisement
Table of Contents
