Table of Contents
Advertisement
NOTICE
●
Do not place anything on or put
stickers onto the head-up dis-
play projector.
Doing so could interrupt head-
up display indications.
●
Do not touch the inside of the
head-up display projector or
thrust sharp edges or the like
into the projector.
Doing so could cause mechani-
cal malfunctions.
Using the head-up display
Enabling/disabling the
■
head-up display
Press the "HUD" switch.
Changing settings of the
■
head-up display
The following settings can be
changed on
information display. (P.500)
Brightness and vertical posi-
tion of the head-up display
Select to adjust the brightness or
vertical position of the head-up dis-
play.
Fuel cell system indicator
Select to enable/disable the fuel
cell system indicator.
MIRAI Owners Manual_USA_M62034_en
Display content
Select to enable/disable the follow-
ing items:
• Route guidance to destina-
• Driving support system display
• Compass (heading-up display)
• Audio system operation status
*
Display angle
■
If the head-up display is disabled, it
will remain disabled when the power
switch is turned off then back to ON.
■
The brightness of the head-up dis-
play can be adjusted on
multi-information display. Also, it is
automatically adjusted according to
the ambient brightness.
■
If the display position is recorded
of the multi-
into memory, the head-up display
will be automatically adjusted to the
desired position. (P.136)
■
The customize settings of the head-
up display will be reset.
3-1. Instrument cluster
tion/street name (vehicles with
navigation system)
(vehicles with navigation system)
: Make sure to enable this display
when using the driving support
systems
Enabling/disabling of the head-
up display
Display brightness
Head-up display automatic
position adjustment (if
equipped)
When the 12-volt battery is dis-
connected
109
*
3
of the
Advertisement
Table of Contents
