Table of Contents
Advertisement
236
5-5. Using the driving support systems
●
Light from an oncoming vehicle,
the sun, etc., enters the front cam-
era.
●
The sign is dirty, faded, tilted or
bent.
●
The contrast of electronic sign is
low.
●
All or part of the sign is hidden by
the leaves of a tree, a pole, etc.
●
The sign is only visible to the front
camera for a short amount of time.
●
The driving scene (turning, lane
change, etc.) is judged incorrectly.
●
If a sign not appropriate for the
currently traveled lane, but the
sign exists directly after a freeway
branches, or in an adjacent lane
just before merging.
●
Stickers are attached to the rear of
the preceding vehicle.
●
A sign resembling a system com-
patible sign is recognized.
●
Side road speed signs may be
detected and displayed (if posi-
tioned in sight of the front camera)
while the vehicle is traveling on
the main road.
●
Roundabout exit road speed signs
may be detected and displayed (if
positioned in sight of the front
camera) while traveling on a
roundabout.
●
The front of the vehicle is raised or
lowered due to the carried load.
●
The surrounding brightness is not
sufficient or changes suddenly.
●
When a sign intended for trucks,
etc., is recognized.
●
The navigation system map data
is outdated.
●
The navigation system is not oper-
ating.
●
The speed information displayed
on the meter and on the naviga-
tion system may be different due
to the navigation system using
map data.
MIRAI Owners Manual_USA_M62034_en
■
Speed limit sign display
If the power switch was last turned
off while a speed limit sign was dis-
played on the multi-information dis-
play, the same sign displays again
when the power switch is turned to
ON.
■
If "RSA Malfunction Visit Your
Dealer" is shown
The system may be malfunctioning.
Have the vehicle inspected by your
Toyota dealer.
■
Customization
Some functions can be customized.
(Customizable features:P.500)
Advertisement
Table of Contents
