Table of Contents
Advertisement
340
6-1. Using the air conditioning system and defogger
or select the "3-ZONE" switch
again.
When the "3-ZONE" mode is on,
the indicator illuminates on the "3-
ZONE" switch.
Front seat concentrated
airflow mode (S-FLOW)
This function automatically con-
trols the air conditioning airflow
so that priority is given to the
front seats. When the front pas-
senger seat is not occupied, air-
flow may switch to only the
driver's seat. Unnecessary air
conditioning is suppressed, con-
tributing to increased fuel effi-
ciency.
Front seat concentrated airflow
mode operates in the following
situations.
No passengers are detected
in the rear seats
The windshield defogger is
not operating
While operating,
Manually turning front seat
■
concentrated airflow mode
on/off
In front seat concentrated air-
flow mode, directing airflow to
the front seats only and to all
seats can be switched via switch
operation. When the mode has
been switched manually, auto-
matic airflow control stops oper-
ating.
MIRAI Owners Manual_USA_M62034_en
Select
screen of the air conditioning
control screen and switch the
airflow.
Indicator illuminated: Airflow
to the front seats only
Indicator off: Airflow to the all
seats
Operation of automatic airflow
■
control
●
In order to maintain a comfortable
interior, airflow may be directed to
seats without passengers immedi-
ately after the fuel cell system is
started and at other times depend-
ing on the outside temperature.
●
After the fuel cell system is
started, if passengers move
around inside or enter/exit the
vehicle, the system cannot accu-
rately detect the presence of pas-
sengers and automatic airflow
control will not operate.
■
Operation of manual airflow
control
Even if the function is manually
switched to directing airflow to only
the front seats, when a rear seat is
occupied, it may automatically direct
airflow to all seats.
illuminates.
■
To return to automatic airflow
control
1
With the indicator off, turn the
power switch to OFF.
2
After 60 minutes or more elapse,
turn the power switch to ON.
Windshield wiper de-icer
(if equipped)
This feature is used to prevent
ice from building up on the wind-
shield and wiper blades.
on the option control
Advertisement
Table of Contents
