Table of Contents
Advertisement
264
5-5. Using the driving support systems
System components
Meter control switches
A
Turning the RCTA function on/off.
Outside rear view mirror indi-
B
cators
When a vehicle approaching from
the right or left at the rear of the
vehicle is detected, both outside
rear view mirror indicators will flash.
Multimedia display
C
If a vehicle approaching from the
right or left at the rear of the vehicle
is detected, the RCTA icon
(P.265) for the detected side will
be displayed on the multimedia dis-
play. This illustration shows an
example of a vehicle approaching
from both sides of the vehicle.
RCTA buzzer
D
If a vehicle approaching from the
right or left at the rear of the vehicle
is detected, a buzzer will sound.
MIRAI Owners Manual_USA_M62034_en
The buzzer also sounds for approx-
imately 1 second immediately after
the RCTA function is turned on.
Turning the RCTA func-
tion on/off
Use the meter control switches
to enable/disable the RCTA
function. (P.100)
1
Press
or
to select
2
Press
or
to select
"RCTA" and then press
When the RCTA function is dis-
abled, the RCTA OFF indicator
(P.95) illuminates. (Each time the
power switch is turned off then
changed to ON, the RCTA function
will be enabled automatically.)
■
Outside rear view mirror indica-
tor visibility
In strong sunlight, the outside rear
view mirror indicator may be difficult
to see.
■
Hearing the RCTA buzzer
The RCTA buzzer may be difficult to
hear over loud noises, such as high
audio volume.
■
When "Rear Cross Traffic Alert
Unavailable" is shown on the
multi-information display
The sensor voltage has become
abnormal, or water, snow, mud, etc.,
may be built up in the vicinity of the
sensor area of the rear bumper.
(P.250)
Removing the water, snow, mud,
etc., from the vicinity of the sensor
area should return it to normal. Also,
the sensor may not function nor-
mally when used in extremely hot or
cold weather.
.
.
Advertisement
Table of Contents
