Table of Contents
Advertisement
WARNING
●
Do not disassemble the sensor.
●
Do not modify the sensor or sur-
rounding area on the rear
bumper.
●
If a sensor or the rear bumper
needs to be removed/installed
or replaced, contact your Toyota
dealer.
●
Do not paint the rear bumper
any color other than an official
Toyota color.
Blind Spot Monitor operation
Vehicles that can be detected by the Blind Spot Monitor
■
The Blind Spot Monitor uses rear side radar sensors to detect the fol-
lowing vehicles traveling in adjacent lanes and advises the driver of
the presence of such vehicles via the indicators on the outside rear
view mirrors.
Vehicles that are traveling in areas that are not visible using the
A
outside rear view mirrors (the blind spots)
Vehicles that are approaching rapidly from behind in areas that
B
are not visible using the outside rear view mirrors (the blind spots)
The Blind Spot Monitor detection areas
■
The areas that vehicles can be detected in are outlined below.
MIRAI Owners Manual_USA_M62034_en
5-5. Using the driving support systems
Turning the Blind Spot
Monitor on/off
Use the meter control switches
to turn on/off the function.
(P.100)
1
Press
2
Press
BSM" and then press
When the BSM function is disabled,
the BSM OFF indicator illuminates.
(Each time the power switch is
turned off then changed to ON, the
Blind Spot Monitor will be enabled
automatically.)
251
or
to select
.
or
to select "
.
5
Advertisement
Table of Contents
