Table of Contents
Advertisement
4-2. Opening, closing and locking the doors and trunk
Doors
4-2.Opening, closing and locking the doors and trunk
Unlocking and locking the
doors from the outside
Smart key system (entry
■
function)
Carry the electronic key to
enable this function.
1
Grip the driver's door handle
to unlock the door. Holding
the driver's door handle for
approximately 2 seconds
unlocks all the doors. Grip
any passenger door handle
to unlock all the doors.
Make sure to touch the sensor on
the back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.
2
Touch the lock sensor (inden-
tation on the surface of the
door handle) to lock all the
doors.
Check that the door is securely
locked.
*
: The door unlock settings can be
changed.
MIRAI Owners Manual_USA_M62034_en
Wireless remote control
■
1
Locks all the doors
Check that the door is securely
locked.
2
Unlocks all the doors
Pressing the button unlocks the
driver's door. Pressing the button
again within 5 seconds unlocks the
other door.
Press and hold to open the win-
*
dows.
*
: This setting must be customized
at your Toyota dealer.
■
Switching the door unlock func-
tion
*
It is possible to set which doors the
entry function unlocks using the
wireless remote control.
1
Turn the power switch off.
2
When the indicator light on the
key surface is not on, press and
hold
approximately 5 seconds while
pressing and holding
The setting changes each time an
operation is performed, as shown
below. (When changing the setting
continuously, release the buttons,
wait for at least 5 seconds, and
repeat step 2.)
121
,
or
for
.
4
Advertisement
Table of Contents
