Table of Contents
Advertisement
WARNING
• Change to digital mirror mode
and adjust the display settings.
●
As the range of the image dis-
played by the Digital Rearview
Mirror is different from that of
the optical mirror, make sure to
check this difference before
driving.
System components
Camera indicator
A
Indicates that the camera is operat-
ing normally.
Icon display area
B
Displays icons, adjusting gauge,
etc. (P.146)
Select button
C
Press to change the setting of the
item you want to adjust.
Menu button
D
Press to display the icon display
area and select the item you want
to adjust.
Lever
E
Operate to change between digital
mirror mode and optical mirror
mode.
MIRAI Owners Manual_USA_M62034_en
4-4. Adjusting the steering wheel and mirrors
Operate the lever to change
between digital mirror mode and
optical mirror mode.
1
Displays an image of the area
behind the vehicle.
2
Turns off the display of the Digital
Rearview Mirror allows it to be used
as an optical mirror.
■
The power switch is turned to ON.
When the power switch is changed
from ON to OFF or ACC, the image
will disappear after several seconds.
■
●
●
Changing modes
Digital mirror mode
will illuminate in this mode.
Optical mirror mode
Digital mirror mode operating
condition
When using the Digital Rear-
view Mirror in digital mirror
mode
If it is difficult the see the rear view
image being displayed due to
water or dust being attached the
camera, operate the rear camera
washer (P.149). If it is still diffi-
cult to see, change to optical mir-
ror mode.
If it is difficult to see the displayed
image due to light reflected off the
Digital Rearview Mirror, the cam-
era being dirty, or if lights of a
vehicle behind your vehicle or the
145
4
Advertisement
Table of Contents
