Table of Contents
Advertisement
2
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
3
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
4
Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
5
While pushing the child
restraint system down into
MIRAI Owners Manual_USA_M62034_en
1-2. Child safety
the rear seat, allow the shoul-
der belt to retract until the
child restraint system is
securely in place.
After the shoulder belt has
retracted to a point where there is
no slack in the belt, pull the belt to
check that it cannot be extended.
6
After installing the child
restraint system, rock it back
and forth to ensure that it is
installed securely. (P.59)
Forward-facing Convert-
■
ible seat
1
Adjust the seat
When using the front passen-
ger seat
If installing the child restraint sys-
tem to the front passenger seat is
unavoidable, refer to P.54 for front
passenger seat adjustment.
When using the rear seat
Adjust the head restraint to the low-
ermost position. (P.139)
57
1
Advertisement
Table of Contents
