Toyota MIRAI 2021 Owner's Manual page 146

Hide thumbs Also See for MIRAI 2021:
Table of Contents

Advertisement

146
4-4. Adjusting the steering wheel and mirrors
displayed image are bothering
you, change to optical mirror
mode.
When the trunk is open, the Digital
Rearview Mirror image may not
display properly. Before driving,
make sure the trunk is closed.
If the display is difficult to see due
to reflected light, close the elec-
tronic sunshade for the panoramic
moon roof (if equipped).
Any of the following conditions
may occur when driving in the
dark, such as at night. None of
them indicates that a malfunction
has occurred.
• Colors of objects in the displayed
image may differ from their actual
color.
• Depending on the height of the
lights of the vehicle behind, the
area around the vehicle may
appear white and blurry.
• Automatic image adjustment for
brighter surrounding image may
cause flickering.
If it is difficult to see the displayed
image or flickering bothers you,
change to optical mirror mode.
The Digital Rearview Mirror may
become hot while it is in digital
mirror mode.
This is not a malfunction.
Depending on your physical con-
dition or age, it may take longer
than usual to focus on the dis-
played image. In this case,
change to optical mirror mode.
Do not let passengers stare at the
displayed image when the vehicle
is being driven, as doing so may
cause motion sickness.
When the system malfunctions
If the symbol shown in the illustra-
tion is displayed when using the
Digital Rearview Mirror in digital mir-
ror mode, the system may be mal-
functioning. The symbol will
disappear in a few seconds. Oper-
ate the lever, change to optical mir-
MIRAI Owners Manual_USA_M62034_en
ror mode and have the vehicle
inspected by your Toyota dealer.
Adjusting the mirror
Adjusting the mirror height
The height of the rear view mir-
ror can be adjusted to suit your
driving posture.
Change to optical mirror mode,
adjusting the height of the rear
view mirror by moving it up and
down.
Display settings (digital mir-
ror mode)
Settings of the display in the dig-
ital mirror mode can be
changed.
1
Press the menu button.

Advertisement

Table of Contents
loading

Table of Contents