Table of Contents
Advertisement
when parking in cold conditions
or when replacing a windshield
wiper insert, change the rest
position of the windshield wipers
to the service position using the
wiper lever.
Raising the wipers to the
■
service position
Within approximately 45 sec-
onds of turning the power switch
off, move the wiper lever to the
(U.S.A.) or
position and hold it for approxi-
mately 2 seconds or more.
The wipers will move to the service
position.
Lifting the windshield wip-
■
ers
While holding the hook portion
of the wiper arm, lift the wind-
A
shield wiper from the wind-
MIRAI Owners Manual_USA_M62034_en
5-3. Operating the lights and wipers
shield.
■
Lowering the windshield wipers
to the retracted position
With the windshield wipers placed
(Canada)
on the windshield, turn the power
switch to ON and then move the
wiper lever to an operating position.
When the wiper switch is turned off,
the windshield wipers will stop at the
retracted position. Even if the wipers
deviate while the power switch is off,
the wipers will return to the normal
position.
■
When lifting the windshield
wipers
●
Do not lift the windshield wipers
when they are in the retracted
position below the hood. Other-
wise, they may contact the
hood, possibly resulting in dam-
age to a windshield wiper and/or
the hood.
●
Do not lift a windshield wiper by
the wiper blade. Otherwise, the
wiper blade may be deformed.
NOTICE
201
5
Advertisement
Table of Contents
