Instrument Height And Target Height Input - Sokkia SET2CII Operator's Manual

14.
COORDINATE MEASUREMENT
14.2 Instrument height and target height
input
0
As preparation for coordinate measurement, the instrument
height (the height difference between the surveying point and the
instrument station height mark
0 )
and target height (the height
difference between the surveying point and the centre of the
target) should be input to the SET2C before the measurement.
The heights of the instrument and the target are measured manu-
ally beforehand, using a measuring tape, etc.
*
Input range:-9999.999 to Retain the displayed value :
(to Basic mode)
Least input : 0.001 m
Correct the value :
@
(set value to
Exit from the input :
(to Basic mode)
Theodolite mode or Basic mode
: For Instr. height
: For Target height
setting mode
Input Instrument
Input height Target
f$gj
Basic mode