Distance Measurement; Measurement Mode Selection - Sokkia SET2CII Operator's Manual

13. DISTANCE MEASUREMENT
The following preparations are required for Distance measure-
ment.
13.1 Measurement mode selection
13.2 Prism constant input
13.3 Atmospheric correction
13.4 Return signal checking
To record the distance values on the IC card,
please refer to P.109.
13.1 Measurement mode selection
Select the measurement mode from the following according t o
your required measurement.
Measurement type Measurement time (slope distance) Units
Single
4.7
secs
Single
1.7
secs
Coarse meas.
First 1.6 secs & every 0.3 secs
10mm