Sokkia SET2CII Operator's Manual page 69

14.
COORDINATE MEASUREMENT
(;new!
Derore measurernenr;
.
2. The V and H circles have been indexed.
3. The instrument parameters and the units
have been set.
4. The distance measurement mode is selected.
s
P.38
5. The prism constant correction value is set.
2
P.41
6. The atmospheric correction is set
7. The centre of the target is correctly sighted
9 P.48
and the return signal is adequate for measurement.
8. The instrument station and the backsight
2
P.56
station coordinates have been input
9. The azimuth angle is set.
Sight the target
1) Sight the centre of the reflecting
prism correctly. (It is also recom-
mended to check the returned
0
signal by pressing
s
P.48.)