Sokkia SET2CII Operator's Manual page 167

21 IC CARD OPERATIONS
@
<Input Coordinate setting-out data
by recalling the coordinate data from the IC cardr
To recall the coordinate data for Point No. 701 from the
selected file as the setting-out coordinate data.
*
The following preparations must be completed before
beginning measurement:
14.1 Measurement mode selection
z
P.52
14.2 Instrument height and Target height input
~jp
P.53
14.3 Instrument station coordinates and
z
P.56
Backsight station coordinates input
14.4 Setting the azimuth angle from the
~jp
P.61
instrument and backsight station coordinates
/ ~ r o m Theodolite mode or Basic mode
\
to Coordinate setting-out data input
, )
SO point
\ j S 9 ,
;No--
1000
Input the point number
I)
Press
@
.
"No." flashes to prompt for the
input of the pointnumber.
2) lnputthe point number "701" and
press
a
.
The coordinate data for 701 is
displayed and is input as the in-
strument station coordinates.
See P.103 from 5) to continue the
coordinate setting-out measure-
ment.
%