Rear Panel Of The Rm-D800 - Sony PCM-800 Operation Manual

2-4 Rear Panel of the RM-D800
There is no connector which accepts any control
signal from the exterior.
@ CONTRAST knob
This controls the LCD display contrast in
continuously variable degrees.
@ EXT 1 (ACCESSORY 1) connector
(D-sub 37-pin)
Connect to the parallel port of analog tape
machines.
Only the transport functions can independently be
controlled from the RM-D800.
@® EXT 2 (ACCESSORY 2) connector
(D-sub 15-pin)
Not used.
® EXT 3 (RS-422) connector (D-sub 9-pin)
For connection to a VTR with the RS-422 protocol.
@ REMOTE OUT connector (D-sub 15-pin)
This connects to the Sony PCM-800 digital audio
recorder. If you have multiple PCM-800s, connect
the SYNC OUT of the first machine to the SYNC
IN of the second, the SYNC OUT of the second to
the SYNC IN of the third, and so on.
If you connect seven or more PCM-800s (up to 16)
in this way, the remote CHASE key cannot control
them. You have to press their local CHASE key.
Chapter 2 Location and Function of Parts
2-17
Chapt HK