Sony PCM-800 Operation Manual page 106

crepe ll
6-7 Punch-in Recording
Rehearsal Mode
AUTO IN/OUT | Off | 1[ AUTO IN/OUT
[Flashing] 2 | AUTO IN/OUT lon
Soiia|
1 = Press RHSL. ©
2 = Press AUTO IN/OUT.
3 = Press CLEAR.
Auto Punch-in Mode
Rehearsal Setting Mode
Auto Review Mode
RHSL Flashing
AUTO IN/OUT
Nomal Transport Mode
Pras of |
auto wour | oF |
Setting preroll and postroll times
You may only enter longer times than the factory preset times, shorter
times cannot be entered (i.e., you cannot enter a preroll time of 4
seconds or less or a postroll time of 2 seconds or less.)
1 Enter the desired time into the LOCATE TIME window with the
numeric keys.
The pre- and postroll times can be set with second accuracy, not
with frame accuracy. So, press 5, 0, 0 to enter 5 seconds.
Effective entries are up to a maximum of 59 minutes, 59 seconds.
2 Press STR.
3 Press PRE (or POST) to store the time just entered into memory as
the preroll (or postroll) time.
6-1 6 Chapter 6 Operation Using the RM-D800 Remote Control Unit