Table of Contents
Advertisement
There must be at least 5 seconds between the START and END
points.
5 Press REPEAT to start repeat play.
To interrupt repeat play
Press STOP.
To resume repeat play, press PLAY.
To exit repeat play mode
Press REPEAT again.
If you press any transport control key during repeat play, the
corresponding function is activated and repeat play will start again if
you perform either of the following operation.
* Recall the START or END point into the LOCATE TIME window, .
and press LOC before or after AUTO PLAY (or, you can press
PLAY after the LOC function is complete)
¢ Press PLAY if you are within the loop or at an earlier point than the
start point.
If no END point is specified, REPEAT cannot operate. If no START
point is specified, repeat play will be from the beginning of the tape
(00.00.00.00. ABS time) to your END memory point.
Frame Display menu (Group 1)
The frame display is hidden when you select "Off" at this menu. This
allows you to enter seconds when using the numeric keypad. "00" is
then automatically entered in the frame section though it remains
hidden. This feature is not effective when machine 7 or 8 is under
control.
Chapter 6 Operation Using the RM-D800 Remote Control Unit
6-9
crepee Hl
Advertisement
Table of Contents
