Table of Contents
Advertisement
Specifications
General
Transport section
Inputs and outputs
Audio characteristics
Power requirements
USA/Canada
Europe
Power consumption
Dimensions (W x H x D)
Mass
Recording format
Tape used
Number of channels
Recording time
Tape speed
Fast forward
/rewind time
Shuttle speed
Digital input
Digital output
Word sync output
Analog input
Analog output
Sync input
Sync output
Word sync input
Word sync output
Remote input
Remote punch in/out
Sampling frequency
Quantization
Pitch control
Frequency response
(record and play)
Dynamic range
Wow and flutter
Total harmonic
distortion
120 V AC, 60 Hz
230 V AC, 50 Hz
90 Watts
482 mm x 197 mm x 377 mm
(19 x 7 3/4 x 14 3/16 inches)
14 kg (31 Ib)
4-rotary head digital recording
Hi8 video tape
Eight plus subcode area
108 minutes using P6/E6-120 tape
113 minutes using P5/E5-90 tape
15.9 mm per second
Less than 90 seconds at P6/E6-120 tape
(100 times play speed)
1/4 to 8 times play speed
25-pin D-sub x 1
25-pin D-sub x 1
BNC connector x 1
XLR connector x 8, +4 dBm (+19.5dBu
max.), 10k ohms (balanced)
XLR connector x 8, +4 dBm (+19.5dBu
max.),
75 ohms (balanced)
15-pin D-sub connector x 1
15-pin D-sub connector x 1
BNC connector x 1
BNC connector x 1
8-pin DIN connector x 1
1/4" phone jack x 1
44. 1kHz/48 kHz
16-bit linear
+/-6% in 0.1 % increments
20 Hz to 20 kHz, +/-0.5 dB
More than 92 dB
(at 1kHz, maximum input level)
Less than measurable limits
0.007% (at 1kHz, —0.5 dB full bit)
Appendixes | A-9
*ppen ll
Advertisement
Table of Contents
