Table of Contents
Advertisement
S3
No. 1, 2 and 3: Device ID
These items determine how to reply to the device-ID-request-
command.
| Not | No.2 | No.3 | Hexadecimal | Machine
PCM-800
Note:
x=1
when time code frame mode is "25" (EBU)
x=0
when time code frame mode is DF, ND or 24 (SMPTE)
No. 4 and 5: Track Mapping
The video control protocol can specify four analog audio tracks and
eight digital audio tracks independently.
The DABK-801 provides some patterns of mapping between tracks
specified in the 9-pin commands and the PCM-800 tracks.
Note that this is not the mapping between the PCM-800 tracks and the
user interface of the editor, but of the PCM-800 tracks and the
command communication. The editor user interface may have "Audio
track 1". Which track represented in the command communication
corresponds to the Audio Track 1, should be determined in the side of
the controller.
pom-00 | ___No.4="ON" | No. 4="OFF* (Pair mode)
Analog 2 (A2)
Digital 2
Analog 2(A2)
Analog 1(A1)
Analog 1(A1)
}Analog 3 (A3)| Digital 3 _| Analog 3(A3) | Analog 2(A2)
Analog 4(A4) | Analog 2(A2)
| Digital? | Digtals | Analog 1(A1) | Analog 3(A3)
| Digial2 | Digitale | Analog 2(A2) | Analog 3(A3)
| Digital
| Digital 7 | Analog 3(A3) | Analog 4(A4)
"en
* Settings at factory
Analog 4(A4)
i
Chapter 5 Operation
5-43
crep HHI
Advertisement
Table of Contents
