Names And Functions Of Parts; Rear Panel; Connections - Sony Anycast station AWS-G500 Operating Instructions Manual

Names and Functions of Parts

Rear Panel

LINE
8 7 6
AC IN
4 Power supply 2 Audio outputs
connector
(~AC IN)
5 Ground terminal

Connections

The rear panel of the AWS-G500 is the only part that differs from the
AWS-G500E. For details on the other parts, refer to the AWS-G500E Operating
Instructions.
1 Audio inputs
AUDIO IN
PUSH PUSH
MIC/LINE
2 1
MIC/LINE
5 4 3
OFF ON
MIX AUX PGM
R L 2 1 R L
HEADPHONES MONI INTERCOM
R L
5 1
9 6
AUDIO OUT
3 Intercom interface connector
For details on the function of each part on the rear panel, refer to the
AWS-G500E Operating Instructions.
The following figure shows a sample system configuration and signal flow. For
details on how to make the connections, refer to the AWS-G500E Operating
Instructions.
After connecting each device, you must configure settings on the unit for each
input and output signal.
For details on settings for each input and output signal, refer to the AWS-G500E
Operating Instructions.
7 SD video interface module
1VISCA
connector
S VIDEO COMPOSITE
I.LINK
S400
RGB COMPOSITE
S VIDEO COMPOSITE
I.LINK
S400
PGM S VIDEO
RGB
RGB
VIOEO OUT
3 Video outputs 8 PC video interface module
Names and Functions of Parts / Connections
2 Cable clips
VIDEO IN
S VIDEO COMPOSITE
SD
1
OFF ON OFF ON
S VIDEO COMPOSITE
SD
2
OFF ON OFF ON
RGB
PC
3
7