Sony PCM-800 Operation Manual page 50

chapter lll
Dy am NU el(emat-rereleeliale
Initial Recording
POWER
ON
OFF
miei IN
'©
"©
= Se aay By ene
CID
- 'eo. —STOP
(=
e
5-4. Chapter.5 Operation
1
2
Load a Hi8 tape into the PCM-800.
Other tape cannot be loaded on the PCM-800.
Select the track or tracks to record on by pressing their REC
FUNCTION key.
If you intend to record a digital audio signal, no level adjustment
is required.
8 Hold RECORD and press PLAY to start recording.
9 When recording is complete, press STOP.
1 0 To prevent recording from being accidentally erased, put the
track(s) into Safe mode by pressing their REC FUNCTION key
again.