Dubbing Audio and Time Code between PCM-800s at One Time
_ -
Pre-operating procedure
Master
Slave
PCM-800/DABK-801
— ~
7 CODE
Termination
jy
plug
The DABK-801 should be installed in both the master (source) and
slave (target) PCM-800s. The following optional cables are also
necessary:
* RCC-S1 sync cable
* Digital cable
Synchronization in this application is ABS-time based (not time code
based).
o o
1 Check to see both PCM-800s are turned off.
6 Tum on both PCM-800s,
Chapter 5 Operation
5-27
Chapt IHHI