Wiring
October 2023
Figure 2-1: Analog output connections
The analog outputs are on the main board near the hinged end of the enclosure door.
For best electromagnetic interference/radio frequency interference (EMI/RFI) protection,
use shielded output signal cable enclosed in earth-grounded metal conduit.
Keep output signal wiring separate from power wiring. Do not run signal and power or
relay wiring in the same conduit or close together in a cable tray.
2.3
Alarm wiring
The alarm relay terminal strip is located just below the power connector on the power
supply board.
See
Alarm relay
14
connections.
Reference Manual
00809-0100-3412
Emerson.com