Oneida Air Systems XCKM013000 Owner's Manual page 24

assembly Instructions (Continued)
Circle the Velcro Tie Straps (F14) around
23
the wires of the unit that you wish to bundle.
Thread the end of the Velcro Tie Strap through
the notch. Tighten until you have a secure fit
[FIG 23].
Connect end of Hose (K1) to Cone Assembly's
24
(B) inlet and secure with Turn Key Hose
Clamp (F32) [FIG. 24a].
Cleanshop Accessories (K2) and the 4 to 2-1/2"
Reducer (K3) are friction fit to collec from
your tools and to aid with all your cleanup jobs
[FIG. 24b].
Installation is complete!
22 Oneida Air Systems
FIG. 23
FIG. 24a
FIG. 24b