Oneida Air Systems XCKM013000 Owner's Manual page 21

assembly Instructions (Continued)
Install the Dust Sentry Infrared Sensor (J) to
15
the Drum Lid's (H) pre-cut hole [FIG. 15]
• Refer to the Dust Sentry Installation Sheet
for more information.
Note: If you are not using the Dust Sentry
ensure that the infrared sensor hole is sealed
with the Button Plug (F35).
Seal the Drum (I) closed using the provided
16
clamp [FIG. 16].
Infrared
Sensor
Hole
FIG. 15
I
FIG. 16
Window
Mini-G Window
infrared Dust Sentry
Discharge
ultrasonic Dust Sentry
Collar for Flex Hose
Clamp
oneida-air.com 19