Table of Contents
Advertisement
User's Manual
Troubleshooting
Problem
No Power
No Live Video
DVR has stopped recording
The icon
displays,
however, the DVR is not
recording.
While upgrading the system,
the DVR keeps rebooting and
the upgrade fails.
Specifications
Signal Format
Video Input
Monitor Outputs
Video Resolution
Record Speed
(images per second)
Playback Speed
(images per second)
Alarm Input
Alarm Output
Alarm Reset Input
Internal Buzzer
Network Connectivity
Audio Input
Audio Output
Text Input
94
Check power cord connections.
Confirm that there is power at the outlet.
Check camera video cable and connections.
Check monitor video cable and connections.
Confirm that the camera has power.
Check camera lens settings.
Check the current main monitor resolution.
If hard disk drive is full, you will either need to delete video or set the DVR to the
Overwrite Mode.
When the DVR is in the Pre-Event recording mode, the yellow
when there is no event, and the DVR is not recording. The red
when any event occurs and the DVR starts recording.
If the current system version is higher than the upgrade package file version, you
should reset the DVR first using the Factory Reset. When using the Factory Reset,
you will lose any settings you have saved.
VIDEO
NTSC, PAL or HD-TVI (Auto Detect)
Composite 8 or 16 inputs: BNC, 1 Vp-p, auto-terminating, 75 Ohms
HDMI: 1 HDMI
VGA: 1
SPOT: 1 BNC, 1 Vp-p, 75 Ohms
HDMI: 3840x2160, 1920x1080, 1440x900, 1280x1024
VGA: 1920x1080, 1440x900, 1280x1024
Composite (SPOT): 720x480 (NTSC), 720x576 (PAL)
Real-time: 480ips @ Full HD
Full Duplex: 120ips @ Full HD
INPUTS/OUTPUTS
8 or 16 terminal, programmable as NC or NO, 2.4V (NC) or 0.3V (NO) threshold,
5VDC
4 relay output, programmable as NC or NO, 2A@125VAC, 1A@30VDC (NO)
1 TTL, terminal block
78dB at 10cm
10/100Mbps, 1Gbps Ethernet (RJ-45)
RCA Input: 4 Line In
RCA Output: 1, Line Out
POS Interface, ATM Interface
Possible Solution
and
display
and
display
Advertisement
Table of Contents
