Ftp; Figure 38: Notification - Ftp Setup Screen - Eneo MPR-32R080200A User Manual

User's Manual

FTP

The DVR can be set up to upload event detected image or video clip on an FTP site when an event occurs.
The FTP box displays the FTP site information.
The Upload File box displays the file format to be uploaded on the FTP site.
Highlight the + and press the
NOTE: For the FTP notification to work properly, the related settings should be configured:
 Network menu > NetFS tab > Use setting
 Event menu > Actions – Notify (FTP) setting
When you delete an FTP site in the NetFS setup screen on the Network menu, the FTP site in the FTP setup
screen on the Notification menu will be deleted, too.
If many event occurs during a short period, images may not be uploaded on the FTP site.
The FTP notification is not supported for system events.
If upload fails several times, it deletes the images or video clips.
When the DVR boots, it deletes all images and video clips even if they were not uploaded yet.
JPG format files will be uploaded even when storage space is not enough.
56
Figure 38: Notification – FTP setup screen.
button to register a FTP site (max. 5).
Highlight the box beside Site and press the
registered FTP sites is displayed. Select an FTP site from the list. If the
Use setting of the NetFS site is set to other than ALL or Clip-Copy, you
cannot select the FTP site. You can change the Use setting or register other
FTP sites in the NetFS setup screen on the Network menu.
Highlight the box beside Upload File and press the
select between CBF, JPG, and MP4. When selecting CBF, the DVR will
upload an event detected video clip on the FTP site. When selecting JPG,
the DVR will attach the event detected image file (JPEG format) on the FTP
site. When selecting MP4, the DVR will attach the event detected video
clip (MP4 format) on the FTP site.
The Site Info box displays the FTP site information.
button. A list of the
button. You can