Eneo MPR-32R080200A User Manual page 23

To export the system log information, connect the USB device to the DVR. If you enabled the NetFS function
(Network menu > NetFS tab), you can upload the log information on the registered NetFS site. Highlight Export...
button. Select USB Storage or NetFS. If you select NetFS, select a NetFS site from the registered
and press the
NetFS site list. Highlight the box beside File name and press the
the file name. Selecting Export will save the log information in .txt file format on the USB device or the NetFS site.
NOTE: When opening the saved .txt file, setting to the proper character encoding and using fixed width fonts
will be required to read the file properly.
The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear All Data... and pressing the
you wish to clear all data before the DVR erases the video data. Clear All Data... will not clear the System Log.
Highlight Wizard and press the
configuring the system for basic operation.
Select either Quick wizard or Network wizard and select the Next button to start the selected setup wizard.
NOTE: Selecting the Cancel button throughout the screens exits the Quick Setup Wizard without saving your
changes and returns to the main setup screen.
button will clear all video data. You will be asked to verify that
button. The Wizard setup screen appears. The Wizard setup guides you through
Digital Video Recorder
button. A virtual keyboard allows you to enter
15