Related Manuals for Eneo MNR-18N04000A
Summary of Contents for Eneo MNR-18N04000A
- Page 1 User Manual Hybrid HD Video Recorder, HD-TVI, AHD, HDMI, SATA, w/o HDD MNR-18N04000A MNR-18N16000A Learn more about eneo IN series on our YouTube channel.
-
Page 2: Table Of Contents
DVR USER MANUAL CONTENT SAFETY INSTRUCTION ................................6 CHAPTER 1: PRODUCT OVERVIEW ............................7 1.1 R ................................... 7 ANEL 1.2 R )..................8 EMOTE CONTROL FOR REFERENCE ONLY SUBJECT TO MATERIAL OBJECTS CHAPTER 2 DVR INSTALLATION & CONNECTION ........................8 2.1 HDD I ................................. - Page 3 DVR USER MANUAL 5.1.9.1 PID (Perimeter intrusion detection) ..........................33 5.1.9.2 LCD (Line Crossing Detection)............................35 5.1.9.3 SOD (Stationary Object Detection) ..........................36 5.1.9.4 PD&VD（pedestrian and vehicle type detection） ......................38 5.1.9.5 FD (face detection) ................................ 39 5.1.9.6 CC (Cross-Counting) ............................... 40 5.1.9.7 Sound Detection ................................
- Page 4 DVR USER MANUAL 5.4.1.5 Cross Counting statistics ..............................73 5.4.1.6 Heat map ..................................75 5.4.1.7 Crowd Detection ................................76 5.4.1.8 Queueing length detection............................. 77 5.4.1.9 License plate detection ..............................78 5.4.1.10 RSD ..................................... 79 5.4.1.11 Schedule ..................................79 5.4.2 Recognition ..............................80 5.4.2.1 Model configuration ..............................
- Page 5 DVR USER MANUAL 5.6.1 Disk ................................118 5.6.1.1 Disk Group .................................. 119 5.6.1.2 S.M.A.R.T .................................. 120 5.6.2 Cloud................................120 5.7 S ..................................121 YSTEM 5.7.1 General ..............................121 5.7.1.1 General Configuration ..............................121 5.7.1.2 Date and Time ................................122 5.7.1.3 Output Configuration ..............................123 5.7.2 Multi-user ..............................
- Page 6 DVR USER MANUAL 7.1.2 Event Search, Playback & Backup ......................147 7.1.2.1 Event Playback Control ..............................149 7.1.3 Sub-periods Playback ..........................149 7.1.4 Smart ................................150 7.1.5 TAG ................................151 7.1.6 External File ..............................152 7.1.7 Picture Search & View ..........................152 7.1.7.1 Picture Preview Control ............................
-
Page 7: Safety Instruction
DVR USER MANUAL SAFETY INSTRUCTION Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Power sources (note: please use the power supply attached or specified by the manufacturer) Never operate the equipment by using unspecified power supply. -
Page 8: Chapter 1: Product Overview
DVR USER MANUAL Chapter 1: Product Overview 1.1 Rear Panel Item Description VIDEO INPUT Connect with video input devices, standard BNC port AUDIO INPUT Connect with audio input signals, RCA port AUDIO OUTPUT Audio signal output, RCA port USB port Connect the supplied mouse or USB flash memory Connect to your TV or a monitor with VGA input. -
Page 9: Remote Control (For Reference Only, Subject To Material Objects)
DVR USER MANUAL 1.2 Remote control (for reference only, subject to material objects) Icon Description Numeric keys Press to display channel 1~8 9 、 0 Numeric keys Press to display all channels Multiple display mode Menu Press to enter or exit the Main Menu Mute Mute On/off Submenu... -
Page 10: Connection Diagram
DVR USER MANUAL （ 2 ） Connect the data and power cables to the HDD and place the HDD on the DVR case. Carefully flip the DVR case and secure the HDD to the DVR with the screws. (3) Put the upper cover back carefully, and fix the cover with screws. Note: Above procedures are for reference only. -
Page 11: Power Supply Connection
DVR USER MANUAL 2.3 Power Supply Connection Caution: Use only the supplied power adapter that came with the DVR Connect one end of the power adapter to the power connector on the back of the DVR. Plug the other end of the power adapter into the wall outlet. For some specific models, you may need to press the Power switch to turn on the power. -
Page 12: Password
DVR USER MANUAL 3.3 Password The first time you run a DVR, you must immediately set your password to protect your privacy.Be sure to record your user name and password and keep it in a secure place. Device ID: Select the language of the interface Device ID: Enter the device ID in parentheses.The default ID is 000000. - Page 13 DVR USER MANUAL ①Security Question Configuration： Question check and modify the main user password function. After opening, you need to choose 3 out of 15 common questions, and set the answer required to retrieve the password. The maximum length of the answer is 64 characters. ②Certificate of authorization：Use the key to modify the master user password function, and click Export to download the key file certificate.
-
Page 14: Chapter 4 Dvr Starting Up
DVR USER MANUAL Chapter 4 DVR Starting up 4.1 Start Wizard Startup Wizard will help to configure the system and get the DVR works quickly. 4.1.1 Start Wizard Click the Start Wizard to proceed to the next step 4.1.2 Network configuration If you connect to a router allows to use DHCP, please check the DHCP box. -
Page 15: Date/Time
DVR USER MANUAL PPPoE（Ethernet-based Point-Point Communication Protocol) dialing: PPPoE (English: Point-to-Point Protocol Over Ethernet), peer-to-peer protocol on Ethernet, is a network tunneling protocol that encapsulates Point-to-Point Protocol (PPP) in an Ethernet (Ethernet) framework.Due to the integration of PPP protocol in the protocol, the functions of authentication, encryption and compression that cannot be provided by traditional Ethernet can also be used for ethernet protocol such as cable modem (cable modem) and digital user line (DSL). -
Page 16: Ip Camera
DVR USER MANUAL 4.1.4 IP Camera Click Search to search IP cameras in the same network. Choose the IP camera(s) you want to add, and then click icon to add to the DVR Enter the camera’s user name & password to add the camera(s). You can also click button to add individual IP camera to a single channel. -
Page 17: Disk
DVR USER MANUAL 4.1.5 Disk If the HDD is installed in the DVR for the first time, it must be formatted. Select the HDD and then click Format HDD button to format the HDD. Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full. -
Page 18: Introduction Of The Real-Time View Interface
DVR USER MANUAL 4.2 Introduction of the real-time view interface Camera name Display the camera name A-: This indicates that the connected camera is an AHD camera T-: This indicates that the connected camera is a TVI camera C-: This indicates that the connected camera is a CVI camera IP: This indicates that the connected camera is an IP camera Status icon ：A Smart alert is triggered... -
Page 19: Camcorder Quick Toolbar
DVR USER MANUAL 4.2.1 Camcorder Quick Toolbar In the preview screen, left-click on the attached camera to display the Quick Toolbar. Video recording: Click to manually record the channel immediately. If a manual recording is ongoing, the icon is in red.Click Stop Manual recording again Grab: Click to save a snapshot of the current camera image. -
Page 20: The Start Menu
DVR USER MANUAL 4.2.3 The Start Menu With the Start menu, you can switch between users, search and playback, enter the System Settings menu, lock and unlock the screen, close, restart and log out the system. Switch users. To enable multiple users, please see 5.7.2.2 Add a new use。... -
Page 21: Chapter 5: Dvr System Settings
DVR USER MANUAL If you select to log out the system (Logout)，the live viewing screen disappears.You will need to log in to the system for further operations. Chapter 5: DVR System Settings You can configure channels, records, alerts, network, device, and system parameters, location: Start ... -
Page 22: Channel
DVR USER MANUAL 5.1.1 Channel 5.1.1.1 Channel setup Analog channels and digital channels can be converted to each other. Just select Digital or Analog in the channel you want to convert and save it to take effect. Therefore, you need to enable XVR mode (System->... - Page 23 DVR USER MANUAL Connect Mode: When you select the onvif protocol, select General Security from the drop-down menu.General represents http connection onvif; Security representative first asks if IPC supports https, if supported, provide certificate, https, if not, http. Mainstream URL: When you select the RTSP protocol, fill the primary stream RTSP address to connect to the IPC.
-
Page 24: Live
DVR USER MANUAL 5.1.2 Live Configure the video camera parameters. Channel: Display channel name. Setup: Click icon into the setup page. Select the channel Name the channel The date format displayed by the camera Time format displayed by the camera Camera refresh rate The camera name is displayed in the preview The system time is displayed in the preview... -
Page 25: Image Control
DVR USER MANUAL 5.1.3 Image control This menu allows you to control image settings for supported IP cameras. Channel: Channel name Setup: Click to enter the Settings page Choose a channel to configure Select the desired built-in IR cut filter mode to ensure the camera works properly both in the day and night. -
Page 26: Ptz
DVR USER MANUAL 5.1.4 PTZ This menu allows you to configure the PTZ (Pan-Tilt-Zoom) settings for the dome camera Channel: Channel name Signal Type: Analog for analog channels, Analog & Digital for IP channels. Protocol: Choose the communication protocol between the PTZ capable camera and DVR. If your camera support UTC (Up the Coax) function, you can choose COAX1 or COAX2 to display your camera OSD menu or control the UTC PTZ function. -
Page 27: Ptz Control
DVR USER MANUAL 5.1.4.1 PTZ control With the PTZ setup complete, you can use the PTZ feature to control the high-speed ball machine ， , Click the left mouse button on the Live View screen channel to open the 4.2.1 Camcorder Quick toolbar then select the PTZ Control icon, and click the icon will display the PTZ control panel. - Page 28 DVR USER MANUAL PRESET mode page:： Click the screen showing the preset point under the preview screen, as shown below； Click or "Add preset point" in the figure above，the preset point screen will be displayed at the bottom of the preview interface, and the preset point will be displayed on the left.
- Page 29 DVR USER MANUAL Line Scan page: Area Scan: Click record start position, rotate the ball machine, click record end position; Speed: Select a linear cruising Speed. Click to start linear cruise. In this mode, the ball machine only moves in the same horizontal plane. Tour page: Time Interval: indicates the stay Time of each preset point Click...
-
Page 30: The Privacy Area
DVR USER MANUAL Pattern Scan page: Record: Click to start recording cruise route, click stop recording. Cruise: Click to start a Cruise using the route and action previously recorded. 5.1.5 The Privacy Area This menu allows you to create privacy areas, and if you want to partially cover certain specific parts of the image, you can create up to 4 privacy areas of arbitrary size and location. -
Page 31: Motion
DVR USER MANUAL 5.1.6 Motion This menu allows you to configure motion parameters. When motion has been detected by one or more cameras, your DVR will alert you to a potential threat at your home. It does this by sending you an email alert with an attached image from the camera to use as a reference (if this option is enabled) and/or sending push notifications via the mobile app. -
Page 32: Pir
DVR USER MANUAL 5.1.7 PIR This is an optional function. If your camera has PIR function, you can configure the PIR recording here. The PIR alarm menu, when the PIR alarm is triggered, it will send the alarm by mail and APP push, just like motion Switch: Enable or disable PIR detection. - Page 33 DVR USER MANUAL Channel: Channel name Setup: Click the icon to enter the setup page. White light deterrent area: Click Select All to set the entire screen of the camera to the white light deterrent area. Click Clear All to clear the entire area. If you want to edit the size of the area, check the box and change the location.
-
Page 34: Intelligent (Intelligent Analytics)
DVR USER MANUAL When the IPC connects to the DVR with the WEB port, the setting page is shown below: The effective time of the white light / alarm linkage alarm of the corresponding function can be set by using the selected function paging. Clear All: Clear the light blue tags for all subpages 5.1.9 Intelligent (Intelligent Analytics) - Page 35 DVR USER MANUAL Channel ： Select the channel that you want to configure Rule Number ： You can set four rules, draw rule areas on the area map and point to the few rules, then you can draw rules on the area map. The Rule Switch (rule switch) and Rule Type (rule type) of each rule are independent, and need to be turned on, off or set separately Rule Switch ：...
-
Page 36: Lcd (Line Crossing Detection)
DVR USER MANUAL 5.1.9.2 LCD (Line Crossing Detection) Line Crossing Detection function detects people, vehicle or other objects which cross a pre-defined virtual line, and some certain actions can be taken when the alarm is triggered. Switch (Switch): Turn on or disable this function Sensitive (sensitivity): sensitivity, parameter range 1~4, default value 2, the higher the sensitivity of the detection target, the easier the moving target in the channel will be detected, and the more misdetection, the... -
Page 37: Sod (Stationary Object Detection)
DVR USER MANUAL If you want to delete a line from the camera picture, click the red box in the line, and then click the Remove (Remove) button. Clicking Remove All (Remove All) will remove all lines. Notice: 1) Lines should not be too close to the edge of the camera image, so as not to trigger an alarm when the target passes through the camera. - Page 38 DVR USER MANUAL Channel: Select the channel that you want to configure Rule Number: You can set four rules, draw rule areas on the area map and point to the few rules, then you can draw rules on the area map. The Rule Switch (rule switch) and Rule Type (rule type) of each rule are independent, and need to be turned on, off or set separately Rule Switch: Enable detection in the rule switch.
-
Page 39: Pd&Vd（Pedestrian And Vehicle Type Detection
DVR USER MANUAL 5.1.9.4 PD&VD（pedestrian and vehicle type detection） The pedestrian detection function detects moving personnel in a predetermined area and takes a series of measures when an alarm is triggered. Switch: Turn on or disable this function Level: The sensitivity level is low, medium to high. Higher sensitivity will be easier to trigger detection. Area: Click Setup... -
Page 40: Fd (Face Detection)
DVR USER MANUAL CAUTION: 1) The test area shall not be located in the human-inaccessible areas. 2) The person found should be completely surrounded by the area. Click the "Alarm" button to configure the pedestrian detection alarm function, for details, please see 5.3.4.4 PD&VD （... -
Page 41: Cc (Cross-Counting)
DVR USER MANUAL Channel ： Select the channel that you want to configure Rule Number: Select the rule number. It is the number of PD regions.The PD function can set only 1 area. Rule Switch: Enable detection in the rule switch. Rule Type: Select Rule Type, Normal is only optional. - Page 42 DVR USER MANUAL Channel: Select the channel that you want to configure. Rule Number ： Select the rule number. It is the number of virtual lines that you can draw. Up to 1 line. Rule Switch ： Enables detection rules in the rule switch. Rule Type: Select the rule type Start Time:...
-
Page 43: Sound Detection
DVR USER MANUAL details:5.3.4.6 CC （ line statistical Click the Alarm button to configure the face detection alarm function for alarm ） You can search for and view the statistical results of the overline counts in the5.1.9.10 Cross Counting Statistics （ line statistical alarm ） Statistics (Overline statistics) (Note: When CC (crossing statistics) is triggered, "S"... -
Page 44: Video Tampering（Video Tampering
DVR USER MANUAL 5.1.9.8 Video Tampering（Video Tampering） Video Tampering detection detects real-time view screen occlusion, and certain specific actions can be taken when an alarm is triggered. Switch：Enable or disable the alarm caused by video cover. Sensitivity (sensitivity): the sensitivity level is 1~6, the default value is 4. The higher the sensitivity, the easier it is to trigger the alarm. -
Page 45: Cross Counting Statistics（Crossing Statistics
DVR USER MANUAL 5.1.9.10 Cross Counting Statistics（crossing statistics） In the line statistics, the number of entry and exit of a period of time can be counted, and reflected in the way of statistical chart. Channel: Select the channel that you want to search for Date: Select the date that you want to search for Report... -
Page 46: Recording
DVR USER MANUAL 5.2 Recording This menu allows you to configure the video recording parameters 5.2.1 Encoding This menu allows you to configure the image quality for recorded video or network transfers.Generally, the master stream is the quality of the recorded video that will be saved in the HDD; the substream is the preview video quality through remote access (such as the Web client and CMS).Mobile code stream defines the preview quality of viewing remotely using mobile devices, and the switch of the connected IP camera's audio, the input and output volume, and the audio type can be set at the Audio interface. -
Page 47: Substream
DVR USER MANUAL Bitrate Control: Select the bit rate level. For simple scenarios, for example, a gray wall is suitable for using a constant bit rate (CBR). For more complex scenarios, such as busy streets, it is suitable for using a variable bit rate (VBR). -
Page 48: Mobilestream
DVR USER MANUAL Resolution: This parameter represents the resolution of the recorded image. FPS: This parameter represents the number of frames recorded by the DVR. Video Encode Type: Channel decoding type, with 264,265,264 +, 265 +, and MJPEG. Bitrate Control: Select the bit rate level. -
Page 49: Audio
DVR USER MANUAL 5.2.1.4 Audio Audio Menu tab: Set up the audio of the camera (with device support). Enable: Set up the audio switch for the video camera. Output Volume: Set the output volume of the camera. Input Volume: Set the input volume of the video camera. Type: Set the audio decoding type of the camera. -
Page 50: Video Recording Schedule
DVR USER MANUAL 5.2.2.2 Video recording schedule This menu allows you to specify when the DVR records the video and determine the recording mode for each channel.The recording schedule lets you set video schedules, such as daily (hourly) regular (continuous) recording, mobile detection recording, I / O alert recording, and PIR recording (if DVR supports) time.To set the video mode, click the mode radio button (General, Move Detection, IO, PIR), and then drag the cursor to mark the area.The recording schedule is valid for only one channel.If you want to use the same recording... -
Page 51: Capture Schedule Table 2
DVR USER MANUAL Auto Capture (autoscratching): Enables or disables autoscratching on the channel. Stream T ype (code stream type): Select the image resolution for the primary or substream. Normal Interval (regular scratch interval): scratch time interval in regular recording. Alarm Interval (Alarm capture interval): capture time interval during triggering mobile detection, IO alarm or PIR. -
Page 52: Alarm
DVR USER MANUAL 5.3 Alarm Configure the alarm parameters 5.3.1 Mobile detection and alarm Channel (Channel Name): Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration in seconds when an action is detected. Alarm Out (Alarm output): optional function. -
Page 53: Pir Alarm
DVR USER MANUAL Post Recording (delayed video recording): You can set the duration of continuous DVR recording after the event occurs.The suggested recording time is 30 seconds, but can be set to up to 5 minutes. Show Message (Display icon): Select this box to display the icon on the real-time display screen when motion is detected. -
Page 54: I/O Alarm
DVR USER MANUAL Latch Time (Alarm trigger time): configure external alarm trigger duration (10s, 20s, 40s and 1Min). Record (recording): Click the icon to select the channel to record when triggering the PIR Post Recording (delayed video recording): You can set the duration of continuous DVR recording after the event occurs. - Page 55 DVR USER MANUAL Alarm In (Alarm input): I / O alarm channel. Alarm Type (Alarm Type): You can choose 3 types: open, close and close. Select a type that matches your sensor type, or select Close to turn off the sensor trigger function. Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm.
-
Page 56: Intelligent Analysis And Alarm
DVR USER MANUAL 5.3.4 Intelligent analysis and alarm 5.3.4.1 PID（Perimeter intrusion Detection） You can configure the PID alarm function here. Channel: Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) when triggering a perimeter intrusion alarm. -
Page 57: Lcd（Line Cross Detection And Alarm
DVR USER MANUAL 5.3.4.2 LCD（Line Cross detection and alarm） You can configure the LCD over-line detection alarm function here. Channel: Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) when triggering a perimeter intrusion alarm. -
Page 58: Sod ((Stationary Object Detection))
DVR USER MANUAL 5.3.4.3 SOD ((Stationary Object Detection)) You can configure the SOD function here Channel: Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) when triggering a perimeter intrusion alarm. Alarm out (Alarm output): Check the external alarm device when the perimeter intrusion alarm is triggered. -
Page 59: Pd&Vd (Pedestrian Detection & Vehicle Detection)
DVR USER MANUAL 5.3.4.4 PD&VD (Pedestrian Detection & Vehicle Detection) You can configure the PD & VD pedestrian and vehicle detection and alarm function here. Channel: Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) when triggering a perimeter intrusion alarm. -
Page 60: Fd（Face Detection
DVR USER MANUAL 5.3.4.5 FD（face detection） You can configure the FD face detection and alarm function here. Channel: Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) when triggering a perimeter intrusion alarm. Alarm out (Alarm output): Check the external alarm device when the perimeter intrusion alarm is triggered. -
Page 61: Cc (Cross-Counting)
DVR USER MANUAL 5.3.4.6 CC (Cross-Counting) You can configure the CC statistical alarm function here. Channel: Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) when triggering a perimeter intrusion alarm. Alarm out (Alarm output): Check the external alarm device when the perimeter intrusion alarm is triggered. -
Page 62: Sound Detection
DVR USER MANUAL 5.3.4.7 Sound Detection You can configure the Sound Detection sound alarm function here. Channel: Channel name Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) when triggering a perimeter intrusion alarm. Alarm out (Alarm output): Check the external alarm device when the perimeter intrusion alarm is triggered. -
Page 63: Video Tampering
DVR USER MANUAL a perimeter intrusion alarm is detected. Send Email (Send Mail): You can let DVR send you automatic e-mail when perimeter intrusion alarms are detected. FTP Picture Upload (FTP image upload): After triggering the alert, upload the alert picture to the FTP server. -
Page 64: Combined Alarm
DVR USER MANUAL Latch Time (Alarm Trigger Time): You can set the triggering of the external alarm device in time (10s, 20s, 40s, and 1Min). Record (Recording): Click the icon and select the channel to record when triggering the perimeter intrusion alarm. - Page 65 DVR USER MANUAL the alarm combination type Motion + PID.Set up the BuzzerAlarm Out, Latch time, Record, Post recording, Show Message, Send Email, Picture to Cloud, Video to Cloud, Full Screen, Voice Prompts. When the CH1 combination alarm switch is opened and Motion + PID is triggered at the same time, (the parameters configured by buzzer, mail, push, upload, etc.
-
Page 66: Ptz Linkage
DVR USER MANUAL 5.3.6 PTZ linkage If you had connected the PTZ cameras, you can set the linkage between PTZ cameras and Motion Alarm and/or external I/O sensor alarm. With the linkage function, you can turn your PTZ cameras focus to the preset point when a motion or I/O alarm happens. -
Page 67: Alarm Schedule
DVR USER MANUAL 5.3.8 Alarm Schedule In this menu, you can set up alarm call, push, FTP upload, cloud upload, buzzer and other time periods. Channel (Channel): Select a channel and set its capture parameters. When the slot is marked in green, the channel works for the slot. 5.3.9 Voice broadcast This function is to realize the alarm occurrence, the system collects the alarm signal and the voice broadcast equipment for linkage, and automatically or manually plays the associated audio to the field... - Page 68 DVR USER MANUAL Local: Local broadcast (when selecting this broadcast mode, the audio output device is connected to the device side) IPC: Network camera broadcast (the camera program has the voice broadcast function, and the camera side supports the audio output) Voice broadcast setting by time period: an alarm type can support setting the voice broadcast for up to 12 time periods.
-
Page 69: Loop Management
DVR USER MANUAL 5.3.9.2 loop management Voice Prompts selects the audio file, and after setting the time period, the selected audio file plays the audio file repeatedly, supporting the voice broadcast for up to 12 time periods. Local: Local broadcast (when selecting this broadcast mode, the audio output device is connected to the device side) IPC: Network camera broadcast (the camera program has the voice broadcast function, and the camera... -
Page 70: Pedestrian And Vehicle Detection
DVR USER MANUAL Picture Quality: Set the image quality, 1 lowest, 100 highest. Min Pixel: Set the minimum recognition pixel box, the face should be greater than the set pixel to be identified. Face Enhance: Face enhancement, open after catching the moving target face effect is enhanced, but will reduce the overall quality of the picture. -
Page 71: Perimeter Invasion Detection
DVR USER MANUAL Setup: Click to enter the setting interface. Switch: enable or close human type & model detection. Channel: Channel selection Snap Mode: Catch mode, with default mode (select the best quality picture push during the period from person & car to disappear), real-time mode (push once when appearing, push again when disappearing) and interval mode (the time and interval of custom push). - Page 72 DVR USER MANUAL Switch (Switch): Turn on or disable this function Sensitive (sensitivity): It has a sensitivity level of 1 to 4. Higher sensitivity will be easier to trigger detection. Area (Monitoring area): Click Setup to row the virtual area in the image Channel ：...
-
Page 73: Line Crossing Detection
DVR USER MANUAL (Note: When the Perimeter Intrusion Detection (perimeter intrusion detection) is triggered, the "S" will appear on the preview screen, In addition, Perimeter Intrusion Detection is mutually exclusive with Human & Vehicle Detection, Face Detection, Line Crossing Detection, Cross Counting, Crowd Density Detection, Queue Length Detection, Licence Plate Detection, Not to open simultaneously) 5.4.1.4 Line Crossing detection The cross-line detection function detects people, vehicles or other objects crossing a predetermined... -
Page 74: Cross Counting Statistics
DVR USER MANUAL B A: The DVR only detects the actions from side B to side A; A B: DVR will detect the action from plane B to plane A or from plane A to plane B; Dynamic Marking: Snap box display switch. 7. - Page 75 DVR USER MANUAL Channel: Select the channel that you want to configure. Type: Select the rule type Person: count the crossing pedestrians only. Motion: Count any moving object that has crossed the line. Vehicle: count only the crossed vehicles. Alarm Num: Set the alert number.
-
Page 76: Heat Map
DVR USER MANUAL 5.4.1.6 Heat map Display the graphics of the popular page area and the geographical area, and the heat map can also tell you which areas of the screen attract most visitors. Switch (Switch): Turn on or disable this function. Area (Monitoring area): Click Setup... -
Page 77: Crowd Detection
DVR USER MANUAL 5.4.1.7 Crowd Detection Population density detection is used to detect population aggregation to maintain controlled order in specific areas. Switch (Switch): Turn on or disable this function Sensitive (sensitivity): It has a sensitivity level of 1 to 4. Higher sensitivity will be easier to trigger detection. -
Page 78: Queueing Length Detection
DVR USER MANUAL 5.4.1.8 Queueing length detection Cohort length detection was used to detect the status of the cohort, including its length and stall time. Switch (Switch): Turn on or disable this function Sensitive (sensitivity): It has a sensitivity level of 1 to 4. Higher sensitivity will be easier to trigger detection. -
Page 79: License Plate Detection
DVR USER MANUAL 5.4.1.9 License plate detection The license plate detection function recognizes whether the license plate of the passing vehicles is an unfamiliar vehicle or the vehicle that has been recorded into the database. At the same time, it can also back up the unfamiliar vehicle license plate information to the database, or retrieve the license plate detection and alarm information for video playback.License plate testing currently only supports license plates in two... -
Page 80: Rsd
DVR USER MANUAL 5.4.1.10 RSD Setup: Click to enter the setting interface. Switch: Enable or turn off sound exception detection. Channel: Channel selection Sensitivity: Sensitivity, 1 minimum, 100 maximum. Detection Type: Detection type Baby Crying Sound: Baby crying can be detected after checking Dog Barking: Dog barking can be detected after checking Gunshot:... -
Page 81: Recognition
DVR USER MANUAL Set the schedule for each AI function switch. Selected is open, not selected for close, gray is not set. Enable: Enable schedules. Functions are mutually exclusive: Features that are mutually exclusive to the selected functions. 5.4.2 Recognition 5.4.2.1 Model configuration Select the algorithm model in this menu. - Page 82 DVR USER MANUAL Click Cancel will pop up a prompt to continue or suspend the update, the remaining not updated next click to update Click To add a new face group or delete an existing face group. (The first three face groups brought by default can not be deleted) Enable: Click Edit to enter the Edit face group interface.
-
Page 83: License Plate Database Management
DVR USER MANUAL In the right information, you can edit the face information. After editing, click Import to complete the import and click Exit to exit the interface. Click External Storage Device, enter the external memory, select the face image you want to import, the same step as importing the local face. - Page 84 DVR USER MANUAL Import Database: You can import the exported packet data into the device. Backup Database: You can export all the groups to a U disk. Group Name: The name of the database group represented as a white list represented as a blacklist indicating unfamiliar license plate list, At the same time, you can add up to 61 custom groups, a...
- Page 85 DVR USER MANUAL Click Import from CSV button to pop up the above interface, select the C SV license plate file to be imported, click OK button. Popup the picture interface below: Click the Import / Modify button to add a batch, and you can also select a single license plate information to modify it.
-
Page 86: Alarm Settings
DVR USER MANUAL Select the date, duration and channel back point Search to search for license plates saved by all devices during this time. Channels: License plate detection events triggered by each channel. Select All: Select all of the license plate information. Click a piece of data to edit the license plate information, and click the Import /Modify button to modify, if... - Page 87 DVR USER MANUAL Alarm Out (Alarm output): optional function.If your DVR supports a connection to an external alert device, you can set up an external alert device. Latch Time (alarm trigger time): Set the external alarm time when the face is detected. Save Face: When a face is detected, the face is saved.
-
Page 88: Face Attribute Alarm
DVR USER MANUAL 5.4.3.2 Face attribute alarm You can configure the face attribute alarm function here. Channel: Channel name Alarm Detection: Set the face attribute alarm type, including close, No Mask without mask and mask Wear Mask. Buzzer (buzzer): The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (in seconds) that triggering a pedestrian and vehicle alarm. - Page 89 DVR USER MANUAL Fault-tolerant: Fault tolerance rate, if set to three characters, the white list in the group is B594SB, and an alert trigger when a B734KB enters the monitoring area. That is, the detection license plate number has 0~3 characters and the database license plate number is different will alarm. Alarm Channel: Set the channel to alarm after the license plate is detected and aligned successfully.
-
Page 90: Pedestrian And Vehicle Detection
DVR USER MANUAL Check the time period that you want to alarm, click Apply to save, and click Copy to copy the parameters to other channels. 5.4.3.4 Pedestrian and vehicle detection... -
Page 91: Pedestrian Intrusion
DVR USER MANUAL You can configure the pedestrian and vehicle alarm function here. Channel: Channel Name Buzzer （ buzzer ） :The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (10s, 20s, 40s, 40s and 1Min). Alarm out (Alarm output): Check the external alarm device when triggering pedestrian and vehicle alarms. - Page 92 DVR USER MANUAL You can configure the PD function here. Channel: Channel Name Buzzer （ buzzer ） :The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (10s, 20s, 40s, 40s and 1Min). Alarm out (Alarm output): Check the external alarm device when triggering pedestrian and vehicle alarms.
-
Page 93: Line Cross Detection
DVR USER MANUAL 5.4.3.6 Line Cross Detection You can configure the line detection alarm function here. Channel: Channel Name Buzzer （ buzzer ） :The DVR can use its internal buzzer to sound an alarm. You can set the buzzer duration (10s, 20s, 40s, 40s and 1Min). Alarm out (Alarm output): Check the external alarm device when triggering pedestrian and vehicle alarms. - Page 94 DVR USER MANUAL Post Recording (delayed video recording): You can set the duration of continuous DVR recording after the event occurs. The suggested recording time is 30 seconds, but can be set to up to 5 minutes. Show Message (Display icon): Select this box to display the icon on the real-time display screen when pedestrian and vehicle alarms are detected.
- Page 95 DVR USER MANUAL Full Screen (Full screen display): If this feature is enabled and pedestrian and vehicle alarms are detected in the channel, you will see the channel in full screen mode. FTP Picture Upload (FTP image upload): After triggering the alert, upload the alert picture to the FTP server.
-
Page 96: Qd Alarm
DVR USER MANUAL FTP Video Upload (FTP video upload): After the alarm is triggered, upload the alarm video to the FTP server. See the 5.5.4 FTP for more details Picture to Cloud (Cloud Storage Picture): After an alert, upload the alert picture to the cloud storage. See 5.6.2 Cloud Storage for more details5.6.2 Cloud Storage Voice Prompts ：... -
Page 97: Lpd
DVR USER MANUAL Voice Prompts ： Voice prompt, when the alarm is triggered, the audio file imported by voice prompt (IPC to support voice prompt function), details can be seen at 5.3.9 Vioce Broadcast 5.4.3.10 LPD Channel: Channel Name Buzzer （ buzzer ） :The DVR can use its internal buzzer to sound an alarm. -
Page 98: Rsd
DVR USER MANUAL 5.4.3.11 RSD You can configure the RSD function here. Channel: Channel Name Buzzer （ buzzer ） :The DVR can use its internal buzzer to sound an alarm.You can set the buzzer duration (10s, 20s, 40s, 40s and 1Min). Alarm out (Alarm output): Check the external alarm device when triggering pedestrian and vehicle alarms. -
Page 99: Statistics
DVR USER MANUAL 5.4.4 Statistics 5.4.4.1 Face recognition statistics In the face statistics, all the faces can be detected in a period of time, and reflected by statistical chart. When Groups, Channels, date, and statistical time are selected, the statistical results will appear directly. Click Export to import the data into the U disk. - Page 100 DVR USER MANUAL 5.4.4.3 CC In the CC statistics, the number of entry and exit of a period of time can be counted, then reflected by statistical chart. Channel: Select the channel that you want to search for Date: Select the date that you want to search for Report Type: Select the report type, with Daily Report, Weekly Report, Monthly Report, and Annual Report...
-
Page 101: Heat Map
DVR USER MANUAL 5.4.4.4 Heat map In the heat map statistics, the frequent activity of some areas over a period of time can be counted and be reflected by a statistical chart. Channel: Select the channel that you want to search for Date: Select the date that you want to search for Start Hour:... -
Page 102: Network
DVR USER MANUAL 5.5 Network This menu allows you to configure network parameters like PPPoE, DHCP and so on.The most common type is the DHCP.Your network type is most likely DHCP unless the network is manually addressed.If an authentication user name and password are required to access the Internet, select PPPoE. 5.5.1 General 5.5.1.1 General configuration If you connect to a router that allows for DHCP s, check the DHCP box.The router automatically assigns... -
Page 103: Snmp
DVR USER MANUAL Enabling PPPoE networking will allow devices to connect to the network via dial-up Internet access. Select the Enable PPPOE box, and then enter the user name and password for the PPPoE. Click Apply to save, and the system will restart to activate the PPPoE settings. 5.5.1.3 SNMP By configuring the SNMP (Simple Network Management Protocol) parameters, the network management side can obtain the equipment information after the network management platform connects with the... -
Page 104: Port Configuration
DVR USER MANUAL When the list selects the WiFi you want to connect, double-click the WiFi name you want to connect Rate: Signal intensity. Security: Security protocol information used by WiFi. Update: Refresh the list. Password: Password for connecting to the WiFi routing. IP Address: The IP address obtained after successful connection to WiFi routing. -
Page 105: Ddns Dynamic Domain Name Server
DVR USER MANUAL 5.5.2 DDNS（Dynamic Domain name server） This menu configure DDNS settings.The DDNS provides a static address to simplify the remote connection to the DVR.To use DDNS, you first need to open an account on the D D service provider's D N S web page. -
Page 106: Email Configuration
DVR USER MANUAL 5.5.3.1 Email Configuration Email: Check to enable. Encryption: Enable if your email server requires the SSL or TLS verification. If you are not sure, set to be Auto. SMTP Port: Enter the SMTP port of your email server. SMTP Server: Enter the SMTP server address of your email. -
Page 107: Ftp
DVR USER MANUAL 5.5.4 FTP This menu allows you to enable FTP function to view and load captured snapshots from DVR to your storage device over FTP. Enable: Click to enable FTP function. Server IP: Enter your FTP server IP address or domain name. Port: Enter the FTP port for file exchanges. -
Page 108: Ip Filter
DVR USER MANUAL 5.5.5 IP Filter This function allows you to set a blacklist and whitelist so that only the IP addresses in the whitelist can connect to the device. Enable：Enable or Disbale the IP filter function. Can use the blacklist or whitelist once enabled. Restricted Type：Select the list (blacklist or whitelist) to set. - Page 109 DVR USER MANUAL 4. Use an existing profile or add a new profile, and log in to the same Amazon account that you bind to a DVR. 5. Search from app store and install Amazon Alexa to your phone, and log in with the same Amazon account 6.
- Page 110 DVR USER MANUAL 7. Click on the search icon in the top right corner. 8. Enter the keyword: Smart Camera View, and search. Click "Smart Camera View" to enter the search results list.
- Page 111 DVR USER MANUAL Click“ENABLE TO USE” 9. You need to link to your Amazon account.Log in to the same Amazon account as you bind to the DVR.Click "Complete" after the successful function link. 10. Click on "DISCOVER DEVICES" to wait for the app to search for the camera.After finding and connecting the device, click on Next.
- Page 112 DVR USER MANUAL 11.Select one of the devices, and then click on SET UP DVICE.You can add an IPC to the group or skip 12 Repeat 11, add all cameras, and click Done to finish.
-
Page 113: Google
DVR USER MANUAL 13. All added cameras are listed in the Devices.Click on the camera icon to view all of the added cameras. 14. Press the voice button on the fire TV stick remote control and say the command clearly.This command may be similar to: Show The XXX camera / Show XXX.The XXX is the video camera channel name.For example, if the channel is named "Office", say the "Show the Office camera". - Page 114 DVR USER MANUAL 5. Log in to the Google account that you have bound on your DVR. 6. Click "Get Started" (Start) to create a home, and then click "New devices" (new device). Enter your home nickname and address, and then touch "Next." Allows location access to applications.
- Page 115 DVR USER MANUAL 8.Your Chromecast will be found.Click on the Next to connect it.Click on Yes to confirm the code. 9.Select the location of the Chromecast and click Next. 10.Select the Wi-Fi network for the Chromecast and enter the Wi-Fi password to connect.Make sure that your Wi-Fi choice is the same as the phone and is in the same local network as the DVR.Click on Continue to the next step.
- Page 116 DVR USER MANUAL 11. Click on No Thanks or Sign Up to login to your Google account. Click Next->Skip->Finish Tutorial 12.The Chromecast has now been added to your Google home page.Click on the + icon in the upper left corner.Indoor, and then select Setup Device.
- Page 117 DVR USER MANUAL Select "Work with Google," click on the search icon in the top right corner, and enter "smart camera view." Click on "smart camera view" in the search results.You will need to log in to your Google account and allow Google access to your device.
- Page 118 DVR USER MANUAL 14.Repeat step 13 to add all the cameras. 15. Search from the app store and install the Google Assistant app to your phone. 16. Run Google Assistant and log in to your Google account that is the same as you bind to DVR. 17.
-
Page 119: Platform Access
DVR USER MANUAL 5.5.7 Platform Access 5.5.7.1 Onvif Turning on this feature will allow devices to be searched for and added by other third-party platforms through the ONVIF protocol. Enable: enable switch, turn on the service function, off whether search or add will fail Authentication: login authentication methods, authentication methods are Digest_sha256, Digest, Digest / WSSE, WSSE four kinds... -
Page 120: Disk Group
DVR USER MANUAL Mounting Type Mounting mode (NFS or CIFS) NFS does not need to enter the NAS account password, whereas CIFS requires the NAS account and password. User Name: Enter the NAS account (unselectable in NFS mode). Password: Enter the Password of the NAS (unselectable in NFS mode). Server IP: Enter the NAS IP address. -
Page 121: 120
DVR USER MANUAL 5.6.1.2 S.M.A.R.T This function can be used to display technical information on the hard drive installed inside your DVR. You can also perform a test (there are three types available) to evaluate and detect potential drive errors. Self-check Type: There are three types available: Short:... -
Page 122: System
DVR USER MANUAL Before activating the cloud function, we recommend that you create a Dropbox account using the same email address and password used for your DVR. Go to www.dropbox.com，nput your name, email address and password, agree to the terms & conditions then click the sign up button. Cloud Storage: Check to enable the function. -
Page 123: Date And Time
DVR USER MANUAL of the web side. Mode: XVR or DVR, XVR mode will allow you to add IP cameras to the DVR. If the mode is changed from xvr to DVR, all added IP cameras will be removed. Audio Input Type: Select the analog channel Input Audio source. -
Page 124: Output Configuration
DVR USER MANUAL The DST (Daylight Saving Time) function allows you to select the amount of time that Daylight Saving has increased by in your particular time zone or region. Enable DST: If Daylight Saving applies to your time zone or region, check this option to enable. Time Offset: Select the amount of time that Daylight Saving has increased by in your time zone. - Page 125 DVR USER MANUAL Output Resolution: Select a display resolution that is suitable for your TV. 1920 x 1080 will suit most TVs. If your DVR supports 4K output resolution, you can select either 2K (2560 x 1440) or 4K (3840 x 2160) to take advantage of the higher resolution that your 4K TV provides.
-
Page 126: Multi-User
DVR USER MANUAL View Mode: Select the number of split screens to display in Static mode. Define SEQ Setting: Select the channel screen for each split screen in Static mode. 5.7.2 Multi-user This menu allows you to configure the user name, password and user permission. -
Page 127: Changing Password And Add New Users
DVR USER MANUAL The system supports the following account types: • ADMIN — System Administrator: The administrator has full control of the system, and can change both administrator and user passwords and enable/disable password protection. • USER — Normal User: Users only have access to live viewing, search, playback, and other functions. You may set up multiple user accounts with varying levels of access to the system. -
Page 128: Setting User Permissions
DVR USER MANUAL Select one of the user accounts that is currently disabled, click the User Edit icon Select Enable from the drop-down next to User Enable. Click the field next to User Name to change the user name for the account. Select Enable from the drop-down next to... -
Page 129: Maintenance
DVR USER MANUAL Set the user's permission and check the box corresponding to the function.Click to select all of the boxes.Click Clear to clear all of the boxes. User password permission setting, the administrator can select the general user permission as required. Have the following privileges to select: ... -
Page 130: Load Default
DVR USER MANUAL Log Searching and Backing Up: Click the field next to Start Date & Start Time to choose the starting date & time for your search from the on-screen calendar. Click the field next to End Date & End Time to choose the end date &... -
Page 131: Reset Setting
DVR USER MANUAL 5.7.3.3 Reset setting You can set whether to format the hard disk when restoring the default 5.7.3.4 Upgrade 5.7.3.4.1 USB Upgrade Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the DVR’s USB port. Click Select File button to choose the firmware file in your USB flash drive, then Click OK. -
Page 132: Parameter Management
DVR USER MANUAL By burning the upgrade file website and the online upgrade switch parameters, you can upgrade the board end online through the network server (HTTP or FTP). (1) When the automatic detection is opened, the initial power on the board will first judge whether it is automatic maintenance and restart, and if it is automatic maintenance, skip to detect whether there is a new upgrade package (judgment method: the current system time is considered automatic maintenance within 30 minutes later than the automatic maintenance time).If it is not automatic maintenance and restart, it will delay... -
Page 133: Developer Mode
DVR USER MANUAL 5.7.3.7 Developer Mode Only some devices support. This menu can save the serial port log to the USB flash disk. Telnet：Enable it, can use Telnet to login device Debug information：You can select the location for saving serial port logs Shut Off：Do not save serial port logs Output To Terminal：... -
Page 134: Load Default Settings For Ip Camera
DVR USER MANUAL 5.7.4.2 Load Default Settings for IP Camera Choose the IP cameras you want to restore. Click Load Default to restore settings. You will be required to input the Admin password to authenticate. 5.7.4.3 Reboot IPC You can restart IPC in this menu. Check IPC and click reboot IPC. -
Page 135: Format Ipc
DVR USER MANUAL 5.7.4.5 Format IPC The SD card of the IPC connected with the API protocol can be detected. After selection, click Format format the SD card of selecting the IPC. 5.7.5 System Information This menu allows you to view the system information, channel information, record information & network status 5.7.5.1 Information View system information such as device ID, device model name, IP address, MAC address, firmware version and more. -
Page 136: Record Information
DVR USER MANUAL 5.7.5.3 Record Information View recording information for each connected camera such as bitrate, stream type, recording resolution and frame rate (FPS). 5.7.5.4 Network State View network information. Total Band Width: It shows the DVR’s total input band width for IP cameras. Used Band Width: It shows the used band width of IP cameras. -
Page 137: Chapter 6: Ai Scenario-Based Application
DVR USER MANUAL Chapter 6: AI scenario-based application AI scene application function you real real view of the face attendance, more intuitive and convenient to view the real situation 6.1 Face attendance Face attendance scene screen full screen display, can record real-time face attendance, real-time view attendance results 1. - Page 138 DVR USER MANUAL 3. Click to enter the setup interface. Channels： Channel selection, you can select the attendance channel Groups： Select the faces of those face library for attendance, and click on the right to pop up to the AI database management settings interface. GUI Theme: Main interface diagram On Duty Time:...
- Page 139 DVR USER MANUAL Enable： Open the email to send face attendance results (the attendance result is a form file) Send Email：Set the time of sending face attendance result email, click the pop-up system mail setting interface on the right side of the sending time to configure the system email. The specific configuration can see 5.5.3.1 Email Configuration Mode: The mode of sending face attendance results, including Day, Week, and Month...
-
Page 140: Cc Scenario
DVR USER MANUAL 6. Face real-time attendance push, display attendance face picture, name, from the group name, work attendance time and off-work attendance time 、6 7. he interface also displays the maximum number of face attendance pushes, with 1 6.2 CC scenario This is an AI application based on cross-count functions that helps control the attendance of customers / visitors / vehicles in public places such as restaurants, parks, zoos, theaters, museums, parking lots. -
Page 141: Groups
DVR USER MANUAL 6.2.2 Groups Statistics and view real-time results by group.It is mainly used in large places with multi-channel entrances and is monitored by multi-channel cameras. 1.Group can select the group information to display, Live displays the channel preview screen and statistics information, and Map displays the map information;... -
Page 142: Search
DVR USER MANUAL 6.2.3 Search You can search for channels and groups separately.Select the channel or group that you want to search for, set the search duration by day, week, month, or year, and select the type of target that you want to search for.Click the search icon and the results appear on the right side of the window. - Page 143 DVR USER MANUAL Click Add New Picture, and click Delete Add Picture one by one. Check the Keep Aspect Ratio box if you want to display an image with the original aspect ratio; uncheck the box if you want the image to be stretched and full screen.Return to Channel View Mode or Group View Mode, click the full screen button in the upper right corner to display your ad picture and real-time count data for the selected channel or group.
-
Page 144: Non-Human Machine Statistics
DVR USER MANUAL 6.3 Non-human machine statistics Face, human shape, motor vehicle, non-motor vehicle detection scene interface full screen display, can view the detection results in real time. 1.Interface theme of machine and non-human statistics 2. Click to enter the playback humanoid model search interface. 3.Click to enter the setting interface. -
Page 145: Chapter 7 Search, Playback & Backup
DVR USER MANUAL GUI Theme: The interface theme Statistics: Statistical time, you can choose 1 day, 2 days, 3 days, 4 days, 5 days, 6 days, 7 days, week, month and year. Channels: Channel selection, you can select the statistical channel 4.Show the current date and time 5.Channel diagram, you can select the diagram channel in 6.Select the number of drawing Windows, with 1... - Page 146 DVR USER MANUAL Search Options: the system provides various search & playback methods: General, Events, Sub-periods, Smart & Pictures Search Date: search by a date to play back. Search Type: the system provides different search types to narrow your search. Channel Selection: to choose the channels you want to search &...
-
Page 147: Search & Play Video In General
DVR USER MANUAL Intelligent Recording in Blue color; PIR Recording in Purple color; Playback Status: display the video play status. 7.1.1 Search & Play Video in General This menu gives an option to search & play recording for a selected date Select a date icon to search for video recording from the calendar. -
Page 148: Event Search, Playback & Backup
DVR USER MANUAL Select a file type for your backup files, click Save button to save the video clips. Please make sure your USB driver has enough space to save the video clips. The backup drive menu appears. Navigate to the folder you want the backup files to save in. Click to begin. - Page 149 DVR USER MANUAL Click icons in the bottom-right corner of the menu to browse between pages of events, or input the page you want to browse. You can switch the view of list form in by clicking below icons which is show at the right bottom corner of the screen: Thumbnails view.
-
Page 150: Event Playback Control
DVR USER MANUAL 7.1.2.1 Event Playback Control Event List, you can select the events here. Click icon to save your selected event videos to USB flash drive. Click icon to play video. Control playback through the icon on the video playback control. You can click the icon or right-click to exit playback and return to the event search window. -
Page 151: Smart
DVR USER MANUAL To search & play video in sub-periods: Click the date & time you want to search. Choose the date & time you want to search. Choose the split-screens you want the videos to be played in. Check the recording types you want to search, or check Search Type to choose all. -
Page 152: Tag
DVR USER MANUAL The red grid is the selected area. If someone in the area triggers the Motion, it will be searched and marked with blue time bar. 7.1.5 TAG Here you can view all the tags you have added and edit, play back, or delete them. Select time and channel click to complete the search. -
Page 153: External File
DVR USER MANUAL 7.1.6 External File This is where you can play video from the external usb drive. Select the file on the left to play it automatically. 7.1.7 Picture Search & View This function can be used to search, play and copy snapshots to a USB flash drive. To search, play &... - Page 154 DVR USER MANUAL Click icons in the bottom-right corner of the menu to browse between pages of pictures, or input the page you want to browse. You can switch the view of list form in by clicking below icons which is show at the right bottom corner of the screen: Thumbnails view.
-
Page 155: Picture Preview Control
DVR USER MANUAL When you click the left button of your mouse upon one of the pictures, system will show the picture information on the left bottom corner of the screen. Check the box next the number of the event to select files, or check the box next Select to select all pictures in the page. -
Page 156: Split Playback
DVR USER MANUAL Press button to display previous snapshot or group of snapshots, press to display the next snapshot or group of snapshots. Click button to view a single snapshot at a time, click button to view four snapshots at a time, press buttons to view nine snapshots at a time. -
Page 157: Face Track Chart
DVR USER MANUAL 1. Click to customize to add the search face.Or choose Groups to select the face pictures of the whole group of the face library for comparison search. 2. Click Channels on Channels to select the channel for the search 3. -
Page 158: License Plate Detection
DVR USER MANUAL If you click the left button on an IPC icon and play back, there will be a simple playback in the lower right corner. If more than one IPC detects the face, the point playback will automatically judge the person's movement and introduce an arrow. -
Page 159: Pedestrian And Vehicle
DVR USER MANUAL Select an event to right-click for two functions: Detail information: View the event details. Custom Playback: Playback settings, click to set how long the event plays earlier and how long it is delayed.The maximum time limit is 10Min. Double-click the event or drag to the bottom-left corner to play the event video. -
Page 160: Pid&Lcd
DVR USER MANUAL 7.1.9.4 PID&LCD After selecting the date, time, channel and alarm type and person and car type, click search to search for the alarm information for the PID and LCD triggered by all people and car during that time period. Left click on the left will have basic information, right click to customize playback and view details.Click on the lower left corner to play for simple playback, double-click to enlarge, and enter the normal playback mode. -
Page 161: Face Attendance
DVR USER MANUAL Left click the search results, click the search results, there will be detailed playback and information on the left, right click to import the face library or edit the face library picture information and view the details. Enter the minimum number of face appearances at the Minimum Occurrences for filtering Click Sort By... -
Page 162: Chapter 8 Remote Access Via Web Client
DVR USER MANUAL Click on a result, and all the detection records are displayed below.Click to enter the details interface. Details on attendance, including the first appearance and last appearance.Click for a simple playback in the lower left corner. Click Export to save the searched attendance information generation file to the U disk Click... -
Page 163: Web Plugin Download And Installation
DVR USER MANUAL 8.2 Web Plugin Download and Installation To access the Web Client, do the following: For IE Chrome: 1. Launch the explorer on your PC and enter the DVR IP address or DDNS domain name (Host Name) you have set on DVR in the URL box. 2. -
Page 164: Web Client Manager
DVR USER MANUAL 8.3 Web Client Manager The web client supports to fully control the DVR with administrator account. Please make sure to protect your user name & password for preventing illegal login. 8.3.1 Live Interface This is the first screen that opens after you have logged in to the Web Client. Here you can open or close live preview, record video to local computer manually, take snapshots of the screens, PTZ control, color adjustment, etc. - Page 165 DVR USER MANUAL Information: Hover over to see system details.. EXIT Manual Alarm ： Manually turn on or off Alarm Out Color Controls. Click to display or hide the color controls. AI alarm ： To trigger the push of AI alarm event, click to check the AI push type, which type will be pushed, click to clear the current push list...
- Page 166 DVR USER MANUAL 10- PTZ Controls Directional Arrows: Click to move the PTZ camera Automatic line scan. PTZ Speed:Click to set the speed of the PTZ camera’s movement. Zoom: Click –/+ to zoom in or out. Focus: Click –/+ to adjust focus. Iris: Click –/+ to adjust iris.
- Page 167 DVR USER MANUAL Watch Mode page: Time Interval: wait Time of the watchposition. It is the Interval between stopping operations and resuming operations of the watch position. Mode: Select the watch Mode, can choose the default, preset point, linear scan, track cruise, pattern scan; Click to start cruising.
-
Page 168: Playback
DVR USER MANUAL 11- Live View Control Buttons: Channel window switch display mode Open the all-channel preview Close all channel preview Original proportion: display the live video according to the original proportion Stretch: live video to fit the entire area of each channel on the screen Zoom in the web client to the full screen Manual recording: Click Start manual recording for all display channels.Click again to stop the recording.Manual video recording is saved to your computer... -
Page 169: Playback Control Buttons
DVR USER MANUAL Search Video: 1、Click Playback in the top-right corner of the window. 2、Select a day on the calendar to search for recordings from. Days with recordings appear with a red underline. 3、Select the recording type to search for from the dropdown next to Type, or select All to search for all recordings. -
Page 170: Picture Playback
DVR USER MANUAL Choose the files you want to download, press Start Download button to begin, you will see the download status. Press Stop Download button to stop. Playback Speed. Click to choose the playing speed. Play All Channels: Click to play all channels you have chosen to searched. Only available when Synchronous playback option is not checked. -
Page 171: Tag Playback
DVR USER MANUAL 2. Select picture from the drop-down menu in the upper left corner. 3. Select a day to search on the calendar. The date with the snapshot is underlined in red. 4. Select the image type to search from the list in the search type menu, or select all to search all types. 5. -
Page 172: Smart Playback
DVR USER MANUAL 8.3.2.4 Smart Playback After setting the mobile detection in5.1.6 Motion Detection, the mobile detection alarm is triggered with the human form to search the Smart playback video in the plug-free browser (Apple Safari / Google browser / Firefox browser / Microsoft Edge browser). -
Page 173: Remote Setting
DVR USER MANUAL 8.3.3 Remote Setting Here you can remotely configure the settings of the DVR. Please see “Chapter 5 DVR System Setup” for more details on the DVR settings 8.3.4 Local Setting Set download locations for recordings and snapshots taken using Web Client, and choose file type for video files. -
Page 174: Chapter 9 Viewing Backed Up Video On Pc/Mac
DVR USER MANUAL Chapter 9 Viewing Backed Up Video on PC/Mac This section will help you to play the backup files with the powerful video player which is attached in the For Mac users, please install the app “VideoPlayer_x.x.xx_xxxx_xx_x.dmg”, for example: VideoPlayer_1.0.15_2017_01_6.dmg. - Page 175 DVR USER MANUAL Video Player Control Play List Add files Remove files To choose play mode: play a single file and stop; play all listed files by sequence; repeat one file; repeat all files. Filter by file name Hide/Show Playlist Click to open files or load a folder.
- Page 176 DVR USER MANUAL Advanced Setup Menu allows to choose the OSD language of the video player, and configure the setting of video player. Basic Settings: Set on-top mode Capture Settings: Set the format and the path to save snapshots.
-
Page 177: Chapter 10 Remote Access Via Mobile Devices
DVR USER MANUAL Chapter 10 Remote Access via Mobile Devices The DVR supports to remote access via mobile devices based on Android & iOS operating system. Search eneoINsight mobile from Google Play Store for android devices or App Store or iOS devices and install. - Page 178 DVR USER MANUAL Select Manual Add and enter the DVR information to Add a new device. Scan the QR code: Scan the QR code to add devices. Online search: On the same LAN as the device, search and add. Manually add: IP address /ID: Enter the IP address or P2P Media port: Enter the media port in the DVR...
-
Page 179: Chapter 11 Appendix
DVR USER MANUAL Chapter 11 Appendix .11.1 FAQ questions 1. What should I do if the hard disk is not detected? A: If the system does not detect the hard disk, check whether the data cable and power cord are well connected, faulty with the interface on the motherboard, or whether the hard disk is supported in the specification. -
Page 180: Usage Maintenance
DVR USER MANUAL 13. Why doesn't the alarm work? Answer: Check whether the alarm setting and alarm connection are correct, and whether the alarm input signal is correct. 14. Why do the buzzers keep ringing? Answer: Check the relevant setting of the alarm, whether the mobile detection is on and detected, whether the I / O alarm is normally closed, and check the relevant hard disk alarm setting. -
Page 181: Accessories (For Reference Only)
DVR USER MANUAL 11.3 Accessories (For reference only) Remote Controller Power Adapter Warranty Card USB mouse CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS The material in this document is the intellectual property of our department No part of this manual may be reproduced, reproduced, translated, transmitted or published in any form or by any means, without the prior written permission of the department. - Page 182 VIDEOR E. Hartig GmbH Exclusive distribution through special- ised trade channels only. VIDEOR E. Hartig GmbH Carl-Zeiss-Straße 8 63322 Rödermark/Germany Tel. +49 (0) 6074 / 888-0 Technical changes reserved Fax +49 (0) 6074 / 888-100 www.videor.com...