Network Setup; General; Figure 28: Network - General Setup Screen - Eneo MPR-32R080200A User Manual

Multisignal hd video recorder, hd-tvi, ahd, 960h
Table of Contents

Advertisement

Network Setup

General

Highlight Multi Stream and press the
more than one stream. You can configure to use a different stream depending on the layout mode or channel in a
remote program.
Highlight the box under the ips heading and press the
value differs depending on the quality and resolution settings.
Highlight the box under the Quality heading and press the
High, Standard and Basic. Press the
Highlight the box under the Resolution heading and press the
High, High and Standard. Press the
NOTE: During playing, the transfer speed can be low.
The higher Quality and Resolution settings require higher Transfer Speed settings. The transfer speed
you set is the maximum speed. Depending on the network environment, this speed may not be achieved.
Highlight the box beside bps/ips. You can select the unit of measure for the transfer speed between: bps and ips.
You can limit the network bandwidth settings so that the system does not consume too much network bandwidth. Highlight
the box beside Network Bandwidth Limit and press the Up and Down arrow buttons to set the desired maximum
bandwidth.
NOTE: When limiting the network bandwidth, the remote watch image on the PC running RAS or WebGuard
might not be displayed properly.
The DVR supports two-way audio communication between a local system and a PC running RAS. Highlighting the box
beside Remote Audio Channel and pressing the
remote site. Selecting Select From RAS will send audio of the channel selected from RAS.
NOTE: Depending on network conditions, audio might be interrupted or out of synchronization during
transmission.
Figure 28: Network – General setup screen.
button to toggle between On and Off. When it is On, the DVR supports
button. You can select the Transfer Speed. The available
button. You can select the Quality from: Very High,
button to set the Quality.
button to set the Resolution.
button allows you to select the audio channel that sends audio to the
button. You can select the Resolution from: Very
Digital Video Recorder
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpr-32r160200a

Table of Contents