Rtsp; Figure 31: Network - Rtsp Setup Screen - Eneo MPR-32R080200A User Manual

RTSP

Highlight Enable RTSP (Real-Time Streaming Protocol) and press the
will be able to change the settings if Enable RTSP is enabled.
Highlight the box beside RTSP Port and press the
your system administrator.
Highlight the box beside RTP Start Port and press the
from your system administrator.
Highlight the box beside RTP End Port and press the
from your system administrator.
Highlight Use Mobile and press the
DVR using a Blackberry or other mobile devices.
NOTE: Selecting Use Mobile sets the WebGuard service to be enabled automatically regardless of your WebGuard
settings.
When using NAT (Network Address Translation) or firewall services, opening all UDP ports allows you
to access a DVR using Blackberry and Android devices.
You can access a remote DVR and monitor live video images using media players, such as VLC Player,
supporting RTSP service. Start the media player on your local PC and enter "rtsp://ID:Password@IP
address:RTSP port number/trackID='channel number'", or start Internet Explorer on your Blackberry or
other mobile devices and enter "http://IP address:Webguard port number/".
Some media players might play video properly depending on network conditions.
RTSP service might not be supported, depending on the type of media player.
Figure 31: Network – RTSP setup screen.
button. Set the port number of the RTSP server obtained from
button. Set the start port number of the RTP server obtained
button. Set the end port number of the RTP server obtained
button to toggle between On and Off. When set to on, you can access a remote
Digital Video Recorder
button to toggle between On and Off. You
49