Sending An Alarm Via Audio Message; Current Position On Sms And Direct Display On Google Maps - Seneca MyALARM2 Series User Manual

Following is an example of a .csv file with GPS coordinates:
INDEX;TYPE;TIMESTAMP;LAT;LON;V;ALT
1;LOG; 21/05/2013 12:05;45,396141;11,956049;0,000000;73,119713
30.8.

Sending an alarm via audio message

A default audio message or a different one can be recorded using a PC with microphone for each alarm.
The call is made to the first member in the set group. If this number answers the call, the second member
is not called. Otherwise, if the first member does not answer the call, MyALARM2 GPS will call the second
until someone in the group answers the call.
If no one in the group confirms receipt, MyALARM2 will restarting calling the first number in the group (for
a maximum of 3 times).
ATTENTION!
• DO NOT hang up while MyALARM2 GPS is making a call since the SIM answering machine
may answer. In this case, MyALARM2 GPS will consider the call answer valid.
• Seneca recommends turning off the answering machine on phone numbers authorised to
receive audio calls.
30.9. Current position on SMS and direct display on Google
maps™
MyALARM2 GPS can send the current GPS position via an SMS link to Google maps™. This operation can be
run on either action or SMS command:
Using a Smartphone with data connection, tap on the SMS link to display the current position map;
USER MANUAL - MyALARM2 SERIES
77