Log Save On Microsd Card; Saving Counters/Totalizers - Seneca MyALARM2 Series User Manual

10.8.

Log save on microSD card

Logs can be saved on a microSD card formatted with the FAT16 or FAT32 filesystem (microSD
cards <= 32 Gbytes are usually already formatted this way).
Log files are saved in the microSD folder/log in .csv text format.
MyALARM2 will create a new file based on the set log send period. Minimum file save time is 2
minutes.
If the microSD card is not inserted, MyALARM2 manages a 16384 row log queue. Logs in the
queue will be saved when the microSD card is inserted.
ATTENTION!
-To avoid corrupting microSD card content, ONLY REMOVE THE microSD card when MYALARM2
IS OFF or WITH microSD UNMOUNTED.
To unmount the microSD card, open the display menu and, holding down the PWR key, select
"Unmount SD".
A new microSD can now be inserted.
The log continues even without the microSD card inserted to a maximum of 16384 rows. When
the microSD card is inserted, Myalarm2 will save missing data, retrieving it from its internal
buffer.
10.9.

Saving counters/totalizers

Counter/totalizer values are saved in the flash memory at least once every 24 hours from when
the device is turned on. Data is also saved every time MYALARM2 is turned off.
USER MANUAL - MyALARM2 SERIES
32