Myalarm2 Gps Context Menu; Fix Gps - Seneca MyALARM2 Series User Manual

30.2.

MyALARM2 GPS context menu

The MyALARM2 GPS model comes with a context menu that permits some operations to be directly run
using the two MyALARM2 GPS keys.
To open the context menu, press the right SCR key to open the GPS menu. At this point, hold down the
right SCR key for several seconds until the menu appears:
You can now select an option from the menu using the SCR key and confirming with the left PWR key.
Possible operations include:
Lock Origin: Current GPS coordinates are used as the centre of the virtual origin (and as calculation point
for sunrise/sunset).
Start tracking: starts the tracking function.
30.3.

Fix GPS

GPS signal fix is a function run by MyALARM2 GPS when started.
This function detects which satellites are within MyALARM2 GPS range and connects to them.
When started, the following is displayed on the GPS screen:
GPS initializing
It then starts fixing:
GPS searching
This phase should be run with the internal or external GPS antenna. Fix lasts from 1 to 2 minutes. The
following confirmation appears on the screen:
GPS fix
If the signal is insufficient (indoors or in tunnels), the following will be displayed:
GPS ...
Until sufficient signal is restored.
USER MANUAL - MyALARM2 SERIES
73