Actions On Alarm Event - Seneca MyALARM2 Series User Manual

28. ACTIONS ON ALARM EVENT

In the event of an alarm, MyALARM2, in addition to sending the alarm via SMS/EMAIL, can also perform up
to 2 actions. The list of actions that MyALARM2 can perform is listed here (for an exhaustive list, refer to
the Easy MyAlarm2 software ):
CLOSE OUTPUT1/2
OPEN OUTPUT1/2
CLOSE TIMED OUTPUT 1/2
OPEN TIMED OUTPUT 1/2
TOGGLE OUTPUT 1/2
RESET COUNTERS
RESET COUNTER 1
RESET COUNTER 2
RESET COUNTER 3
RESET COUNTER 4
RESIDUAL CREDIT REQUEST
COUNTER VALUE REQUEST AND RESET
START LOGGER (TIMER 1)
STOP LOGGER (TIMER 1)
START TIMER
STOP TIMER
ENABLE ALARM ON POWER OUTAGE
USER MANUAL - MyALARM2 SERIES
ACTION
Closes output 1/2
Opens output 1/2
Closes output 1/2 for the indicated time, then
Opens output 1/2 for the indicated time, then
Changes output 1/2 status
Loads value 0 on all counters
Loads value 0 on counter 1
Loads value 0 on counter 2
Loads value 0 on counter 3
Loads value 0 on counter 4
Returns residual credit value
(for top-up SIM only)
Returns the value of the counter 1, 2, 3 or 4 and
Starts the datalogger
Stops the datalogger
Starts timer 2 or 3...10
Stops timer 2 or 3...10
Enables the power outage alarm with set
67
COMMENT
opens it
closes it
resets it
parameters